Announcement

Collapse
No announcement yet.

Das V8 Coupe Quattro

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dspl1236
    replied
    so i found 2 sets of bmw 1200cc itb's on ebay...then saw that they were local. road trip. called and they held the parts. got there and well they were a bit small 34mm. most 1000 stuff is like 38m. i asked what else they had. brought me out 3 sets of 09 Kawasaki 1400gtr itb's with 40mm. will match the vw 16v 41mm ports nice.....and were cheaper to buy the 3 over all over the bmw 2.

    each set has fuel rail, injectors, map sensor, isv, isv tps, tps, and all wiring




    Leave a comment:


  • dspl1236
    replied
    awesome just scored 2 sets of euro 1200cc itb's

    be back shortly

    Leave a comment:


  • stinkinrich
    replied
    So god damn cool man, loving this!

    Leave a comment:


  • dspl1236
    replied
    just too easy

    v8 gasket on v8


    16v lower bolt hole


    v8 gasket on 16v mani


    16v mani on v8




    Leave a comment:


  • dspl1236
    replied
    1.8/2.o 16v stuff



    ordering 2x of these....

    Leave a comment:


  • NeedingAnAudi
    replied
    Are those 2.0 intakes? Awesome!

    Leave a comment:


  • dspl1236
    replied
    1991 V8 Stock
    3.6 liter, 32-valve, 90 (degree)
    Bore: 3.19 in. (81.0 mm)
    Stroke: 3.40 in. (86.4 mm)
    Displacement: 217 cu. in (3.6 liters)
    Compression Ratio: 10.6:1
    Horsepower (SAE Net): 240 @ 5800 RPM
    Torque: 254 ft. lbs. @ 4000 RPM

    just on abt chip 280chp, limited by 14.6lb injectors.....




    1992 Audi V8 DTM
    Specifications
    Displacement 3561.8 cc
    Bore and Stroke 81mm x 86.4mm
    Torque 380 Nm at 7000rpm
    Output 470 bhp at 9500 rpm





    Last edited by dspl1236; 11-07-2011, 11:53 AM.

    Leave a comment:


  • Big Ben
    replied
    awesome!!! more more more.

    Leave a comment:


  • dspl1236
    replied
    could lead to awesome...


    Leave a comment:


  • dspl1236
    replied
    Originally posted by 1badg35 View Post
    what did you use to clean the transmission? looks stunning from post 128-129


    aluminum flat ceramic spray paint


    haha, my buddy(4x4) came back to the garage one weekend and saw that and was like "wow that is clean", how did you do that. was not until he looked close

    before the paint i used an oxidizer on the block/trans my other buddy in hvac uses to clean ac units. nasty stuff.

    Leave a comment:


  • 1badg35
    replied
    what did you use to clean the transmission? looks stunning from post 128-129

    Leave a comment:


  • dspl1236
    replied
    Ditched the 2 stage power steering pump/brake booster. need to get a mr2 electric pump

    anyone have one for sale?

    Leave a comment:


  • dspl1236
    replied
    small steps


    alum subframe bushing test....need to get back to the bay clean

    Leave a comment:


  • dspl1236
    replied
    Originally posted by stinkinrich View Post
    but an i4 20vt is a straight forward swap right?
    we talking mk3? if so yes 100% straight forward.


    thanks guys! sometimes your own motivation is just not enough to build epic without others

    Leave a comment:


  • Baby Kito
    replied
    Thats one powerhouse

    Leave a comment:

Working...
X