Stanced Trucks?

[milano_red]

lololol at shocks!

as for torsions, ya a lil bit of cranking will feel nice, I cranked the SHIT out of mine to fit the 29" tires that are on now and its bouncy as hell

then again, when the mazda was slammed the lower control arm was literally sitting on the rubber bump stop , my buddies didnt even have torsion bars, and all the control arm bushings were seized so there was no travel at all haha

ya 1/4 is getting to the max thickness of slip ons on oem studs for basically every vehicle

Haha, I'm removing my torsion bars completely probably next week, then flares!

[Majyk]

After I address the low needed on our daily drivers I will be going more aggressive with my truck.

[OhYamp]

^^^ thats rad

[Isuzupickup]

You guys gotta re-index the bars! It helps with the ride quality quite a bit. There's probably threads on mini truck sites, but basically you pull your bar out and reinstall it a few teeth turned and it regains some stiffness. I'm totally going coilovers in the future though. 8) By the way that mighty max is dope!

[Majyk]

^^^ thats rad

Thanks man.

[dubmr2]

You guys gotta re-index the bars! It helps with the ride quality quite a bit. There's probably threads on mini truck sites, but basically you pull your bar out and reinstall it a few teeth turned and it regains some stiffness. I'm totally going coilovers in the future though. 8)

ye i did that to go low and to go high

[Belvader]

Looks good, any wheel plans?

thanks and either gold rota grids or just keep the stock ones on cause they look pretty good

[Belvader]

changed up my front end

[cruuz]

my vote is for the ones next to the truck in the last pic

[Isuzupickup]

Has anyone had any experience with "Sway away" torsion bars?

[metalmonkey47]

but these poked trucks are rarely seen anywhere on roads

Let me introduce you to my daily driver:


_DSC0117 by metalmonkey47, on Flickr


_DSC0069 by metalmonkey47, on Flickr

[dubmr2]

haha awsome

And ya, I daily drove the grey one as you see it all summer:

Has anyone had any experience with "Sway away" torsion bars?

never heard of em

[notsolow]

My bros truck. Just finished it this weekend.

[Brimmy]

Let me introduce you to my daily driver...

[LethalEthan]

Has anyone had any experience with "Sway away" torsion bars?

They used to make bars for the mightymax and I've heard they were good, but have no personal experience with them.

Edit: also, calmini made torsion bars for the Isuzu for a while. Not sure if they still do, but it may be worth looking into.