Romans Daily/Drifter/Track Car

[Rob&co]

http://www.stanceworks.com/forums/showthread.php?t=41439

i **** 17's but those would be so cool for like weekend mount up s lol sat wheels they would tuck so hard!

[180roman]

You need to find me some 4x100 something little like under 16in or so! And mean and wide! lol

Buy them wheels I linked you


For Valentine's day, I made my baby a present by mostly finishing up the interior.
Looks so much prettier now.

[Rob&co]

You need to find me some 4x100 something little like under 16in or so! And mean and wide! lol

[180roman]

Pretty much almost finished the wiring and wrapped it up in tape.

Ran out of tape, so need to buy 2 more rolls, so i can then wrap it in conduit over the tape.

Also relocated my ignitor chip to under the wiper motor, so I wouldn't melt it again if i blow a turbo gasket.

Just a little bit left to finish piecing together the wiring and then it is time to put the interior back together.

[180roman]

How on earth can you afford all these wheels?!

The SSR's are my favorite.

The trick is I can't afford them, but I buy them anyway


Did some work on the car today

Started by trying on the new wheels

Yes this should look sick once it is on the ground again


Then I cleaned up the garage a bit and re-arranged my wheel stacks for more room.

Some say I have too many wheels, but I say I just don't have enough space...


And then I actually did work on the car afterall

Picked up some parts from Bursons and bolted the turbo onto the car.

[Minuki]

How on earth can you afford all these wheels?!

The SSR's are my favorite.

[180roman]

nice i need OZ!

So many wheels!

Never enough wheels

a drifter can never have to many wheels

Never enough wheels

Here is a better shot when I picked them up

[pitbulldrifter]

a drifter can never have to many wheels

[martinm13]

Never enough wheels

[milano_red]

So many wheels!

[Rob&co]

nice i need OZ!

[180roman]

And so I bought another set of wheels....

OZ Racing Pegasus in 17x9 +24, to match my newly acquired OZ Futuras in the same specs above

[180roman]

Oh yeah also bought this rare set



OZ Futura 17x9 +24 (made for the GTR Skylines)

[180roman]

Kinda stopped being lazy.... not really...

Did a little work on the car and decide to just run the T28 with stock boost, stock injectors and no tune, since I cant afford it.

So I picked up an S14 water elbow to run the turbo water lines and fitted all the lines to the turbo

Hopefully I'll be done with the wiring next weekend if I can gather up enough motivation.

Than it is just a race to the finish as everything else is just bolting stuff back on.

[180roman]

do work son

don't have the moneys atm

OUCH! I just need to do a couple things on my cage then I'm good to go.. I'd love to get some front ubs done but don't think I have time/money to do it. New VDC rules are shitty.

Yeah man, the rule change was a bit shitty, but i know where they are coming from.

They wanted to remove any liability from VDC, so they chose to go with an existing CAMS roll cage standard.