Tweet
How on earth can you afford all these wheels?! 
The SSR's are my favorite.
The SSR's are my favorite.
-
The trick is I can't afford them, but I buy them anywayOriginally posted by Minuki View PostHow on earth can you afford all these wheels?!
The SSR's are my favorite.
Did some work on the car today
Started by trying on the new wheels
Yes this should look sick once it is on the ground again
Then I cleaned up the garage a bit and re-arranged my wheel stacks for more room.
Some say I have too many wheels, but I say I just don't have enough space...
And then I actually did work on the car afterall
Picked up some parts from Bursons and bolted the turbo onto the car.
Drinking Enthusiast with a Car ProblemComment
-
Pretty much almost finished the wiring and wrapped it up in tape.
Ran out of tape, so need to buy 2 more rolls, so i can then wrap it in conduit over the tape.
Also relocated my ignitor chip to under the wiper motor, so I wouldn't melt it again if i blow a turbo gasket.
Just a little bit left to finish piecing together the wiring and then it is time to put the interior back together.
Drinking Enthusiast with a Car ProblemComment
-
You need to find me some 4x100 something little like under 16in or so! And mean and wide! lolIG @RobthaBavarian
Comment
-
Buy them wheels I linked youOriginally posted by Rob&co View Post
For Valentine's day, I made my baby a present by mostly finishing up the interior.
Looks so much prettier now.
Drinking Enthusiast with a Car ProblemComment
-
i **** 17's but those would be so cool for like weekend mount up s lol sat wheels they would tuck so hard!IG @RobthaBavarian
Comment
-
pft, what kind of pussy sizes are thoseOriginally posted by Rob&co View Post
I see your Eurolines and I raise you Weds Kranze LS207 for approximately same price
18x9/10 +13
Drinking Enthusiast with a Car ProblemComment
-
on a roll with progress this week
Things left to do:
45deg joint
cut hot pipe down to size
Extend power cable
tidy the interior(cable tie wiring out of the way an fit the rest of the trim and seat)
Crank car for a while to ensure oil spreads throughout the engine
Fire it up
Do an oil change
Test all the interior accessories to make sure all the wiring still worksDrinking Enthusiast with a Car ProblemComment
-
good progress was madeFloccinaucinihilipilification
Comment
-
no such thing as too many wheels
just wondering roughly how much the shipping on the wheels is?
i have two e30's sitting in my driveway but sadly nothing happens very quickly
my tumblr for anyone thats interested: http://crispyas.tumblr.com/Comment
-
Thanks Papa BearOriginally posted by P78 View Post
there is always room for 1 more set....Originally posted by doug_e30 View Postno such thing as too many wheels just wondering roughly how much the shipping on the wheels is?
Shipping from Japan varies in cost depending on the wheel weight
So I had some sets of 15s cost as little as $250 to ship from Japan, and sets of 17s costs usually around $350-400 to post.Drinking Enthusiast with a Car ProblemComment
-
How exactly do you contact the people in japan about your wheels? Cause thats where im sketched out about it... What site do you buy your wheels off of?Comment
-
Originally posted by 02wrx801 View Post
He is an import broker in Japan, so he buys the item over there, gets it posted to his house, packages it up and sends it to you.
He is very reliable and deals with customers from all over the world
I buy wheels from the Japan equivalent of eBay auctions, which is Yahoo auctionsDrinking Enthusiast with a Car ProblemComment
-
hmmm... what is this thing doing in my garage to pretending to be all like a car....
Drinking Enthusiast with a Car ProblemComment
-
Comment