Spirits project -e36 323 loon

[Spirit]

Nice build buddy. Keep it up!

Thanks mate nice to get comments from time to time on here

[Spirit]

Started cleaning them up but im just not feeling them at the moment......maybe a colour change in anthracite like i did the bbs rims at santa pod all over might suit more but came up ok really for an old set




powerwashed with snowfoam then used ag clean wheels then demon shine to finish,tyres need to come off really to fit mine on as they are 45 profiles and too wide for me and odd sizes




And just leaned one on the rear to give me an idea of look.they are 7j all round on et47 which is fine for wide tyres and a std height car but mines ahem very low and cant afford some more spacers like 20mm atm being out of work to make it how i want.




if anyone fancies a swop for some other 17s pm me as i want 7.5j minimum really or i shall sell them unless i change my mind again

Andy

[InSpeedWeTrust]

the car has changes significantly (in a GOOD way) since you bought it!
Kudos to you man, I look forward to see future mods

[Spirit]

the car has changes significantly (in a GOOD way) since you bought it!
Kudos to you man, I look forward to see future mods

Thanks for the kind words hopefully I can make it better work permitting and after the mot I can drop the height down again

[InSpeedWeTrust]

^ You deserve it man, the car's initial stage was a mess and now it looks amazing! I am really curious what wheels will follow..
I also wanna see this bad girl LOW !

[Spirit]

^ You deserve it man, the car's initial stage was a mess and now it looks amazing! I am really curious what wheels will follow..
I also wanna see this bad girl LOW !

Wheels for shows ive chosen and funds but job comes first really.gonna get some **** for them but I dont care its mine to do what I choose.rear height im happy with now as its not draggin its arse around like before lol and fronts I have 30mm left to go and more if I dump the helper springs

The best is yet to come theres some suprises over the year still to come.

Andy

[InSpeedWeTrust]

Wheels for shows ive chosen and funds but job comes first really.gonna get some **** for them but I dont care its mine to do what I choose.rear height im happy with now as its not draggin its arse around like before lol and fronts I have 30mm left to go and more if I dump the helper springs

The best is yet to come theres some suprises over the year still to come.

Andy

Sounds nice ! i'll keep on eye on your biuld.. :P
Good luck buddy !

[Spirit]

Sounds nice ! i'll keep on eye on your biuld.. :P
Good luck buddy !

And yours buddy

[bmxspert]

nice i have now seen the whole thread i love the work and the car ,i had to laugh out loud when i saw sandringham gates lol great minds think a like
the rims cant be the reason for low amount of comments i put 10j wheels on my e36 and only you commented
but i know a comment from a lynner is worth a hundred comments lol
i did the m50 conversion i take it that front breather disintigrated mine did
i actually found one at bacons yard i found the injectors were the worst bit i popped one off thinking il change that big mistake they are fiddly as fudge to snap in also the bolt on the manifold thats at the back you know the one
well i was thinking is stanceworks for me
then i got in contact with you and im now going to a meet so some good came out of it plus since i now know your from lynn
i have been playing where is that photo taken lol
your crash was that just off the little chef round about heading hardwick way
guessing you were coming round from the bmw yard on the 47 where i believe you had other photos taken lol

cant wait to see the new wheels

and all the e36s at halfords

[bmxspert]

also one of my mates is coming in his e36 hes just put some 16x9 borbet a style gold centers shiny lips
hes now lowering it will look sweet when hes done

[Spirit]

nice i have now seen the whole thread i love the work and the car ,i had to laugh out loud when i saw sandringham gates lol great minds think a like
the rims cant be the reason for low amount of comments i put 10j wheels on my e36 and only you commented
but i know a comment from a lynner is worth a hundred comments lol
i did the m50 conversion i take it that front breather disintigrated mine did
i actually found one at bacons yard i found the injectors were the worst bit i popped one off thinking il change that big mistake they are fiddly as fudge to snap in also the bolt on the manifold thats at the back you know the one
well i was thinking is stanceworks for me
then i got in contact with you and im now going to a meet so some good came out of it plus since i now know your from lynn
i have been playing where is that photo taken lol
your crash was that just off the little chef round about heading hardwick way
guessing you were coming round from the bmw yard on the 47 where i believe you had other photos taken lol

cant wait to see the new wheels

and all the e36s at halfords

yes mate sandringham is ahem a target for drifts sometimes as its empty and yes nut no 7 on the m50 what a ballache to do and infact putting it back it came off and is missing now.having my one redone on monday as im not happy with its fitting kit and aaron reeve performance is doing it for me now as ive given up on it

bbs rims are staying and the other set hopefully at some point i will buy for show time.now need some 20mm spacers to fill the rear up more for now or 15mm maybe.
mot is next week also

[bmxspert]

what are the symptoms? if i can help you in anyway i will, i think you need to get no7 on and the whole thing tight , i have some spare manifold bolts ,when i did mine i first bought a kit off of ebay but when it got here i was like its a bit poor shit white plastic pipes but i needed the the big pipe connector thats snaps in under the m50 but i looked at all the bits and thought b&q got some copper pipe corners and a copper t bit the fish plates were no good i got to pin the fuel rails down i didnt have a clue about manifolds when i did it just keep googling and reading i kept going to bacons and getting odd pipes
did you clean your idle valve while you had it apart this is a really good tip i was given,another thing i did was when i first put it in i looked in from the front under the maifold and realised that big pipe was quite kinked up so i took it apart again an stuck another copper corner ,what did you do with your tempreture sensor i put mine in the rubber boot that goes from the maf to the throttle body
i bought a bag of copper corner bits if you want some i got plenty left

i rip around sandringham i live in ingoldisthorpe so literally a stones throw away lol

[Spirit]

Pm me your address mate maybe we could meet before monday and check it out.def gonna need bolt no 7 anyway:::

Andy

[bmxspert]

the worst job on the e36 is the starter motor what a fuck pig i ended up taking it to a garage you have to reach up and over the gear box with a meter of extension bars and you have to move the m50 to get it out dont know why bmw bolted it this way ,but i did figure something out when it first started playing up there is a tiny screw in the top i just took it out and put a drop of oil in and it lasted a year with the occasional wack lol

[bmxspert]

sent address bud