Fourth Time's the Charm - Another Air Hatch

[Dremetos]

Meh, The way I look at it, if they fail, how far does the car have to fall before it hits the ground?

[fackinsteve]

I have to agree with those forks, at least from the pic they don't look that safe. I would feel safer getting the billet ones for $250

Its only money

[Dremetos]

Its only money

exaaaaactly, broke college student teen VS quality machined parts = hacked ish....

In all seriousness, __squuaad__'s work is quite good, I've never heard any complaints from any of his products and he's done many forks & spindles. Guy stands behind his work and builds one-off cars for a living, so I trust him.

[Dremetos]

Picked up some 15x8 0et & 15x10 -12et diamonds today for a decent price. Enkeis are going bye bye. These need two tires (going to step down to 165's in the front, and move the 195/45's to the rears) but other than that, it's officially time to destroy my fenders long time.




Due to bag clearance in the rear, extreme negative camber will not be the move. Here's a before and after in regard to poke. I do believe a wide body will be required

"The outer rim will poke out 62.4mm more than before."

[SnazzyQ]

noooooooooooooooooooooooooooooooo I liked the enkeis so much more.

oh whale. In for widebody tho

[Shogunate]

Give me your 92's so I can put them on my '92

[Meeve]

agreed the enkei were tits. Diamonds are common.

[fackinsteve]

My friend mike with the rusted Del Sol is running flares and -5 camber I believe with the same spec wheels you have so I don't think it will bring much of a challenge

[Dremetos]

After required rear spacers ill be at a final -37et in the rear, not to mention mike doesn't need to put his subframes on the ground lol. I love the Enkeis but the specs are just too weak for my vision for this thing

[Dremetos]

Bag is shipping tomorrow. Airlift lost my bag for a while..

[ihate0sc]

i fuck with the steelies

[Imaeechew]

Meh, The way I look at it, if they fail, how far does the car have to fall before it hits the ground?

Only reason I said something is because welding cast can be tricky and if done wrong it will fail. If they work they work though, Depending on how my front end sits with my 18's I might be getting a set of the billet ones.

I have never been a fan of those steelies but the chrome lip and painted center give them a completely different look, Those are going to look good with a widebody.

[fackinsteve]

Thats crazy for a fücking hatch haha. My rear offset is -23 and it could honestly come out another half an inch

[Dremetos]

I gotta grab a test fit picture after class tomorrow lel. Literally stuck past fender 3" with the tire fully jacked up against the fender. Enkeis shall be sold tomorrow and new tires ordered accordingly.

Ordered rear camber links to squeeze as much out as I can before bag clearance is an issue.

[fackinsteve]

So if I bring beer can we do werk?