Fourth Time's the Charm - Another Air Hatch

[jalenda9]

S e x u a l

[Shogunate]

Beatiful

[Dremetos]

25mm rear spacers are ordered, rear barrels ever so slightly tap the bags when fully aired out, and I intend on it moving whilst aired out, so that presented a problem. Other than that, just waiting for a bag and that's it.

[ihate0sc]

damn bruh

[fackinsteve]

I love you

[meech]

***waits for video blasting dirt everywhere when airs out***

[Dremetos]

Spent the weekend at Club Loose North watching some of the best drifting I've ever seen. Car is all set, just waiting for the new bag so I can determine how much to section my spindles to prevent future "mating," then you'll see some pics. Yes, it blows dirt lol

[jalenda9]

You trynna drift son?

[Imaeechew]

Very nice! We need a shot of the whole car though, lets see the low in all it's glory

[TWM Performance]

Very nice! We need a shot of the whole car though, lets see the low in all it's glory

This!

- Renato

[Dremetos]

Been bullshit recently, waiting on shipping still. They haven't even gotten the bag as far as I'm aware. Regardless, I've gotten my camber plates up front to actually function and got the spindle pretty far away from the bag (on the one side I can test, but the camber SHOULD be even now that both ball joints aren't clapped..)

Also decided to spindle drop the car, with it set on the ground (the other front resting via a small piece of wood under the pinch weld...) it was reverse raking a tiny bit and the front wasn't completely hitting the ground so that isn't sufficient. Should be dropping those off to get welded Tuesday. After I get those, and my bag back, it'll be fully laying out on the ground, tucking 15" wheel all around (or damn close to it.)

[Imaeechew]

I might have missed it...Did you blow a bag and have to send it back? You probably could have bought a new one and had it by now, then just keep the other as a backup

[RocketSled]

I'm sorry, but who welded those drop forks?

[Dremetos]

I might have missed it...Did you blow a bag and have to send it back? You probably could have bought a new one and had it by now, then just keep the other as a backup

It's a stupid unibody design, the bag is clamped to the strut itself (these 4-6th gen Civics have extremely tight strut clearances due to not being MacPherson struts) so that wasn't an option.

__squuaad__ made my drop forks (two _'s) (DM him on IG), he charged me 150 shipped to my door and used his forks so meh. Took about three weeks to get them though. Better than 250 for any other set though.

[Imaeechew]

It's a stupid unibody design, the bag is clamped to the strut itself (these 4-6th gen Civics have extremely tight strut clearances due to not being MacPherson struts) so that wasn't an option.

__squuaad__ made my drop forks (two _'s) (DM him on IG), he charged me 150 shipped to my door and used his forks so meh. Took about three weeks to get them though. Better than 250 for any other set though.

That is why I don't do air on Honda's McPherson suck! I have them on my daily and the wagon rides so much better.

I have to agree with those forks, at least from the pic they don't look that safe. I would feel safer getting the billet ones for $250