Will these fit???

[Dr.AK]

Theres someone here running them on his e36 M3, ill look for the pics

Yes but with 205's camber and rolling and pulling

Those are NOT Remotecs and NOT 9x17 ET8. Those are Rials in 8.5x17 ET13.

[cabezzz]

Those are NOT Remotecs and NOT 9x17 ET8. Those are Rials in 8.5x17 ET13.

Ok my bad , ill look for the for the 0 offset e36 running on staggered M5 turbines with spacers, has hella camber on the

Damn cant find the pics on BF's, they were there a while back, forgot to save them, but never the less, 8 et fronts will be a task, but its the right thing to do

[Persson]

Go wide or go home, right???


I will make these babies fit... If its the last thing I do....



To be continued......

[Dr.AK]

I like the way you think

[Zic]

Theres someone here running them on his e36 M3, ill look for the pics

Those are NOT Remotecs and NOT 9x17 ET8. Those are Rials in 8.5x17 ET13.

Yeah, but hes running a 10mm spacer up front, to clear the breaks. So his final et is 3, on a 8,5''. If your are gonna run 9'' and et 8, you are gonna poke 1,5mm more.

So you will need to roll the back fenders, and a little pull (depending on how much camber you will go with) And on the front, you will need to remove the liners(plastic inside the fender well) and roll them. (also depending on, if you are gonna run camber plates)

Hope thats enuff help.

[cabezzz]

Yeah, but hes running a 10mm spacer up front, to clear the breaks. So his final et is 3, on a 8,5''. If your are gonna run 9'' and et 8, you are gonna poke 1,5mm more.

So you will need to roll the back fenders, and a little pull (depending on how much camber you will go with) And on the front, you will need to remove the liners(plastic inside the fender well) and roll them. (also depending on, if you are gonna run camber plates)

Hope thats enuff help.

How much camber is he running up front?

[Persson]

The seller, sadly, backed out of the sweet deal...

So the search continues...

Today I testfitted some serious wheels...
Breyton Vision 10,5x20 ET34 with 285/30-20 Hankook S1 evo

Sadly, they actually fit pretty good.. With 17 or 18 inch this would be super

The car was a little bit too low, fender stood firmly against the tires side....

But what the hell, 20 inch is not what I want to run.

[cabezzz]

Dont worry, youre in Europe, youll find a sweet deal on some baller wheels pretty soon

[Persson]

Found another set today...

http://www.blocket.se/jamtland/17__B....htm?ca=16&w=3

A very unusual wheel, atleast in that size, according to the seller its 9,5x17 ET8...

Really want these to fit on the car, but I know, Its almost impossible right??

BTW, got some more decals on today... Sticker whore....

[cabezzz]

Found another set today...

http://www.blocket.se/jamtland/17__B....htm?ca=16&w=3

A very unusual wheel, atleast in that size, according to the seller its 9,5x17 ET8...

Really want these to fit on the car, but I know, Its almost impossible right??

BTW, got some more decals on today... Sticker whore....

Damn 9.5 et8 will be a task, test fit with a 205 40 and take pick of that crazy poke