OZ Futura lips nad barrels sizes.

[lowrider]

may i have some clarifications on the part with the subdivisions please, thank u

[Zic]

they're ET30

If they are reverse mounted, they should be 1,75inch lip and 6,75inch barrel.

[projektzwo]

If they are reverse mounted, they should be 1,75inch lip and 6,75inch barrel.

are you sure, because the wheels are reverse mounted but i measure the barrel and it's over 18cm, which means 7inch...

probably the barrel is around 19cm, as the lip sits just like this, the only one difference here is that the wheels are not sandwich:

[Zic]

Sounds like they are 1.5inch lips and 7inch barrels then. depending on the back pad.

[Chris@fifteen52]

1" lips .5" face and 6" barrel for 7.5" wheel

[projektzwo]

Sounds like they are 1.5inch lips and 7inch barrels then. depending on the back pad.

well, today i measured the inner barrel and it was 18,5cm...

[JeyJey]

Can you help telling me the measures of the centres caps?

diameter of the logo base and height such as the diameter of the hole screw?

Thank you

[Crankey]

are those wheels sandwich mounted ? looks like alot of area on the center to fit the barrel behind the lip, with the center fitted in from behind. then the center would be more flush with the lip.

and as to what size a lip is, if it's .5 inch from the bead where the tire sits to the bolting surface, I call it a 1/2" lip. that is the conversion I used to identify lips before and it seems to be true.

best thing to do is take em apart and then measure them...they need a refinish anyway.