Bagged e46 // CCW Classics

[booogs]

Original thread for my car here, although images might be broken

http://www.stanceworks.com/forums/showthread.php?t=13669

Finally got my CCW Classics mounted. Looking to redo the rears though because the Michelins don't stretch very well. They are too meaty for my taste. Also going to have to redo my front air setup so I can slam the car more. Pictures were taken real quick by a friend of mine. Hoping to get a legit shoot soon once I install my diffuser.

And yes, I know my car's dirty. (all stickers are coming off this week too)

edited disclaimer: i know the car isn't super low for it being bagged. i need to modify my front struts to slam it more. when setting up the e46 for air suspension, it gets pretty tricky. you're really limited in the front if you don't go with the premade $1500 struts that are out there. if you build it yourself with your own strut and bag combo, you need to modify the struts to get the clearance you need. i modified mine to fit my old 19" chs, which is why they aren't fully lowered at the moment. but now that i have a smaller diameter wheel, i can modify it to accommodate for the extra room i have.

[slowjett]

looks very nice! What you got done under the hood ?

[Kielan]

I like the meaty rear tire. Looks good man, in for details on whats under the hood, I spy a FMIC.

[Jesus Christ]

clean up the front bumper and IC set up and you got a winner

[booogs]

looks very nice! What you got done under the hood ?

I like the meaty rear tire. Looks good man, in for details on whats under the hood, I spy a FMIC.

AA stage 1, but added an intercooler of my own since the stage 1 didn't come with one at the time. I think AA offers the new stage 1 with a small FMIC, but I could be mistaken. I'm looking to do a swap in the near future. Was really thinking of a 2jz swap. Haven't gotten around to doing my research on it but I know it's been done on my chassis before already.

clean up the front bumper and IC set up and you got a winner

thanks jesus! was already considering a new oem m3 front with the same race splitter from vorsteiner last night. still not sure if i want to pull the trigger on that though.

[Khalil]

What are the wheel specs? I'll help you figure out proper tires sizes.
Front should be lower, especially since your bagged
Looks good though

[SeanDub]

Awesome looking car, though I expected much lower of a bagged car.

[Anonymoose]

Loving the look on those wheels. Bumper fitment though

[booogs]

What are the wheel specs? I'll help you figure out proper tires sizes.
Front should be lower, especially since your bagged
Looks good though

the rears are 235/40/18 on a 10". i was looking for some 225/35s but couldn't find anything locally, hence the meaty tires. the fronts are 215/35/18 on 9".

and yeah i need to modify my front struts to slam it more. when setting up the e46 for air suspension, it gets pretty tricky. you're really limited in the front if you don't go with the premade $1500 struts that are out there. if you build it yourself with your own strut and bag combo, you need to modify the struts to get the clearance you need. i modified mine to fit my old 19" chs, which is why they aren't fully lowered at the moment. but now that i have a smaller diameter wheel, i can modify it to accommodate for the extra room i have.

[booogs]

Loving the look on those wheels. Bumper fitment though

OEM m3 front fenders are in the works. i have them sitting around in the garage. just going to section out the flare portion to widen up the front.

[SceneBM]

looks alot better than your old set-up
give me your wheels and amber indicators!

[Niterider03]

I think it looks awesome. I cant wait to see some clean daytime pics of it.

[booogs]

looks alot better than your old set-up
give me your wheels and amber indicators!

you looking for the amber side indicators? if so, i have those. and wheels were sold already

[PavelK313]

Love it!!!

[FRESH]

Sick.