Euro ToYoTa CoolRolla :D

[dzvini]

I've made a polyurethane upper engine mount insert instead of old ripped one...it's really hard material (shore-90), but the feeling is interesting



Cleaned rear coilovers during the winter (while old struts and springs where on the car )



A month ago I've bought back my old wheels MS Design 8x18" ET45 with Goodyear F1 Eagle 215/35/18. I didn't like the wheels that I tried, also couldn't find the right substitute for these Then I've lowered the car -3cm all around. Then, I put back my old modified front bumper with fog lights, also made a DIY lip





I've put back Short Ram Intake instead the oem airbox with panel K&N



I've also put back oem backbox

Last few days I'm driving on these (borrowed from a friend) wheels Borbet "RST17" - 9x16" et30 with tyres 215/40/16. The diameter of the wheel is a LOT smaller than needed, but this is just for a few days





It is SO LOW, that I scrape almost all speedbumps and I can't park anywhere but the streets



I think that's all from last 2 months

[dzvini]

Toyota Corolla TS by Vukasin Aleksic Photography, on Flickr

Toyota Corolla TS by Vukasin Aleksic Photography, on Flickr

Toyota Corolla TS by Vukasin Aleksic Photography, on Flickr

Toyota Corolla TS by Vukasin Aleksic Photography, on Flickr

Toyota Corolla TS by Vukasin Aleksic Photography, on Flickr

Toyota Corolla TS by Vukasin Aleksic Photography, on Flickr

Toyota Corolla TS by Vukasin Aleksic Photography, on Flickr

Toyota Corolla TS by Vukasin Aleksic Photography, on Flickr

[lowlydubb3r]

Looks pretty good. But unless you're sponsored by Monster I think you should remove that sticker. It's a huge eye sore IMO

[magoo_lc1]

Like others said i wish we got this car. I love toyotas and a hatch would of been nice. Lookin good

[runningpanda]

Nice monster sticker.

[dzvini]

...unless you're sponsored by Monster I think you should remove that sticker. It's a huge eye sore IMO

I have another bumper, this one was broken, and I repaired it by myself, so I didn't want to repaint it, plus I had green wheels that I've sold... That other bumper will be on the car soon, I even bought a new front spoiler

[dzvini]

Then I put back 18", and some new stickers too

[dzvini]

Then...another try, just for a day or two...Schmidt Modernline 9x16 F:et25; R:et15; tyres Toyo Proxes 215/40/16

[dzvini]

After all, my wheels



Photoshopping

[dzvini]

And finally 1:43 Minichamps 8)

[dzvini]

I've finally tried these 9x17" it's a RH ZW1 with ET47...it needs wheel spacers of course...I didn't try to drive because it's not safe with my short oem wheel studs in front and too wide wheel spacers (2 pieces combined) in the back...

Front - with 6mm spacer - that's like 9x17" et41:



Rear - 2 spacers (15mm+25mm=40mm) - that's like 9x17" et7

[dzvini]

It's been a while...

I've put my other bumper and a facelift front spoiler-lip...I thought it's the same length but I was wrong, so some cutting and fitting was needed...Now it looks kinda ok, don't you think!?

And some nasty mobile pictures :P

[X5X]

Looks good with the new bumper If its a uk spec, shouldent it be right hand?

btw, I am from serbia

[dzvini]

It is made in UK but it's Euro model, so it's lhd

Well, "pozdrav" from Serbia

[dzvini]

Small height difference between my dropped TS and friends oem 1.4 vvti




Somewhere in Belgrade







Toyota Club Serbia had a Big Meet at our first race track NAVAK

http://farm7.static.flickr.com/6083/6123898927_c3b0957820_b.jpg

http://farm7.static.flickr.com/6184/6122832815_134a77d9a5_b.jpg

http://farm7.static.flickr.com/6090/6123904385_eb5c13366a_b.jpg

http://farm7.static.flickr.com/6065/6123903773_ebdce52815_b.jpg

I got new number plates



Cleaning with steam

boot before:

boot after:

And the rest of the car