Announcement
Collapse
No announcement yet.
Euro ToYoTa CoolRolla :D
Collapse
X
-
I am planning to improve front brakes by installing a custom kit, calipers are from Alfa Romeo 166 V6, and still thinking and calculating, trying which discs will suit the best...
For now, it will probably be disc from a Renault Clio/Megane 2,0 RS, those are 312,5mm x 28mm, while Alfa's are 310x28 but more important is the depth of discs, Corolla TS has 24,2mm, Alfa has 19,5mm and Renault 35mm deep disc, so that makes them stand further away from the wheel's spokes. V6 Calipers are huge and around 60mm wider than oem so they will stick out 30mm more then Corolla's
Disk on these pictures is 330mm x 32mm from a Mercedes CLS, just for a test fitting...
Comment
-
Few weeks ago I've bought this box and just tried it for a few days, it's nice and loud but I won't put it back on the car before spring
Also, I've tried my winter set with BC Racing set on -70mm
Then I've tried my summer wheels with winter height, OEM shocks and Eibach Pro Kit -30mm
And this is the final look for this winter
Comment
-
As said in the previous comments, I wish we got a Corolla hatch out here. Looks great so far man.My 2011 Toyota Vitz build thread.
http://www.stanceworks.com/forums/sh...ad.php?t=56411
Comment
-
Just trying calipers on 330mm disc with 18" for taking all necessary measurements.
Comment
-
A little project over the winter, cleaning bits and changing springs, they cracked after 5 years, didn't expect that but... :/
Wanted to try some PlastiDip paint on the front sign and in the interior...Tried on this peace of plastic first to see how it feels and peels
This is "Rubber paint" by Igor Simovic on Vimeo, the home for high quality videos and the people who love them.
This is "Rubber paint 2" by Igor Simovic on Vimeo, the home for high quality videos and the people who love them.
Winter mode with -16* celsius
Santa brought me a present, front Alfa V6 pads, but still waiting on front Focus RS1 discs
Comment
-
Time flies
Brake calipers are restored, everything ready for installation, that is hopefully soon
Coilovers restored too, shocks are still good but couple of springs were cracked/broken :/ so I decided to buy several different sets for front/rear shocks
I've been playing with rear coilovers for 3 hours, they let me do it by myself
I am satisfied how it looks and "sits" right now
Changed the air filter instead of cleaning the old one
Finally installed rear panel speaker adapters
My present project is headlight restoration and DIY Morimoto projectors installation, I would like to put a couple of projectors in each and paint everything black, we'll see if that's possible
Then I will install this FK mask
also paint and install front TTE lip that will probably crack in few days because it's terribly low in the front
This is enough for now
Comment
-
Decided to restore headlights and add a little bit of "custom" Morimoto bi-xenon H1, high beam light became daytime running lights with H7 led bulbs, led tubes are daylight running lights/indicators, led bulbs in side repeaters too, plastic surroundings and projector covers painted matt black, outer surface polished and I will add foils over them as a protection...xenon bulbs are 6000K for now but I will probably change those for 5000/4300K.
Also, I tried a new FK Automotive grill...
Some combinations how it looks and works
Comment
Comment