My S13 240 : Ls swap, Corvette trans,ITB's, Widebody, Stupid wide wheels,

[storey618]

i would **** to be your wheel bearings lol seriously though, these wheels made my day!!!

[laextreme5]

i would **** to be your wheel bearings lol seriously though, these wheels made my day!!!

Eh, car wont be a DD, and prolly only get 5000 miles a year, not worried about it. Starting with new 5 lug hubs and bearings so they will be fresh and not already worn.

[laextreme5]

For some reason the garage was extremely filthy even after not being worked in for 1.5 months.
untitled (1 of 16)-2 by lawrx, on Flickr


Anywho, had the front knuckles and LCA's come in today. So i mocked them up together along with the dumpster adjustble tie rod ends, all from gktech.

untitled (2 of 16)-2 by lawrx, on Flickr

untitled (3 of 16)-2 by lawrx, on Flickr

untitled (4 of 16)-2 by lawrx, on Flickr

untitled (5 of 16)-2 by lawrx, on Flickr

untitled (6 of 16)-2 by lawrx, on Flickr


After i made sure everything was there I mounted all the rear suspension linkage and the knuckles to the subframe and then the subframe to the car. Reason being is MY FUCKING WHEELS HAVE SHIPPED, so clearly you can see i am excited to mock them up. Rear hubs should be here few days before the wheels show up, so till mock up its just a waiting game.

untitled (7 of 16)-2 by lawrx, on Flickr


untitled (8 of 16)-2 by lawrx, on Flickr


untitled (9 of 16)-2 by lawrx, on Flickr

untitled (10 of 16)-2 by lawrx, on Flickr


untitled (11 of 16)-2 by lawrx, on Flickr


untitled (12 of 16)-2 by lawrx, on Flickr


untitled (13 of 16)-2 by lawrx, on Flickr


untitled (14 of 16)-2 by lawrx, on Flickr



I also had a spare piece of alumilite laying around, so i decided to tape it up crudely to get an idea of how high up into the rear body the diffuser will go at the desired angle i want. For street cars the safe range is 7-10*, however i will have a fairly efficient full underfloor and rear wing so I'm going to go in the 12-14* range. Upon holding it up, from the bottom of the subframe (pretty much where the diffuser will start) up to about 1" into the rear body is a 12-13* angle. Which works out great. AS it leaves me room on either side to run AUX. coolers and the license plate in the center. This also means no rear bumper. However since the rear diffuser comes up so high and the coolers and license plate are right above it, it won't have that naked rear end look like the standard typical rocket bunny s13's have. Functional and better looking IMO, win win for me
untitled (15 of 16)-2 by lawrx, on Flickr

untitled (16 of 16)-2 by lawrx, on Flickr

[jalenda9]

Damnnnnnnnnnn son

[laextreme5]

Only had a half day of work today, so i made the best of the nice day and worked out in the garage this afternoon.

I started out by disassembling the front and rear knuckles so i could use the hardware on the new items once they had all come in. Also decided to throw the hardware along with my wheel bolts in the cleaner shaker thing i can never remember the name of.

untitled (1 of 14)-2 by lawrx, on Flickr

untitled (2 of 14)-2 by lawrx, on Flickr


When i removed the front wheels and suspension out of the front floor board, i realized the car wanted to flip off the jack stands, because i had the transaxle and rear suspension all bolted up. It was a good bad thing all the weight is in the rear haha. So i threw the wheels on a dolly set between the frame rails to even out the weight. Once i had finished dissembling the front knuckles, i took the wheels off and mounted the motor back up front.



untitled (3 of 14)-2 by lawrx, on Flickr


untitled (4 of 14)-2 by lawrx, on Flickr


After getting there motor back in, i decided it was about time i got the steering rack mounted up to the front subframe. As i mentioned before i moved the rack over to the driver side so that the steering shaft has a direct path to the steering rack, eliminating one u joint, which will help in the feel department tremendously.


untitled (5 of 14)-2 by lawrx, on Flickr

untitled (6 of 14)-2 by lawrx, on Flickr

untitled (7 of 14)-2 by lawrx, on Flickr

untitled (8 of 14)-2 by lawrx, on Flickr

untitled (9 of 14)-2 by lawrx, on Flickr

untitled (10 of 14)-2 by lawrx, on Flickr



Once i had the steering rack all in place on the front subframe i bolted it back up and decided to halfway mock up the front suspension, because why not right?
untitled (11 of 14)-2 by lawrx, on Flickr

untitled (12 of 14)-2 by lawrx, on Flickr

untitled (13 of 14)-2 by lawrx, on Flickr

untitled (14 of 14)-2 by lawrx, on Flickr

[laextreme5]

Mini somewhat related/unrelated update.

Rear hubs came in so got one bolted up and decided to take some measurements about where i roughly think the wheel edge will sit. It looks like it will poke about 2.75". This was with about the camber i want to run, -1.8 ish. If this is intact about where it sits ill probably widen it another 1' and i should be good, between the slight stretch and a pinch more camber. Also took a measurement and the overall width is about 78-79", aka 18 wheeler wide lololol ridiculous. I love it.


untitled (1 of 10) by lawrx, on Flickr

untitled (2 of 10) by lawrx, on Flickr

untitled (3 of 10) by lawrx, on Flickr

untitled (4 of 10) by lawrx, on Flickr

untitled (5 of 10) by lawrx, on Flickr

untitled (6 of 10) by lawrx, on Flickr

untitled (8 of 10) by lawrx, on Flickr


I also started tear down on our old 50s stroller for our soon to be here son Oliver (holy shit he is only 4-6 weeks away from being here). EVERYTHING on this thing is frozen and rusted up. Someone has clearly been in here before as there are a bracket here and there but nothing i can't repair and make it look like it came like that from the factory.
untitled (7 of 10) by lawrx, on Flickr

untitled (9 of 10) by lawrx, on Flickr

untitled (10 of 10) by lawrx, on Flickr

[colorado_e36]

That stroller is going to be dope!

[kevvy_dawg]

Where is the stroller thread? Looking epic dude, love the updates

[laextreme5]

That stroller is going to be dope!

Where is the stroller thread? Looking epic dude, love the updates

Haha thanks guy. I actually dont have a thread for the stroller. But i will keep posting updates in here for you guys

[laextreme5]

SOON







IMG_5253 by lawrx, on Flickr

[laextreme5]

LOW KEY I KNOW YOUR WATCHING COREY.



Well this week has been fantastic so far.

MONDAY. Bought a new daily. Pretty good deal i couldn't pass up, love these cars. 2014 with only 5800 miles. Great condition. Silverado will be getting sold.

Plans for the car. Drive.drive. drive. drive.

Short terms goals
-catback exhaust
-shifter bushings
-possible final drive change
-few knick knack things here and there

Realistic by end of the year goals
-Coilovers
-wheels
-rear lcas
-possibly drop in the recaro thats for the 240
-drive it some more

Long term goals

-2jz swap
- custom wheels
-few rare ext. pieces
-drive drive drive

As you can well this car will be very modest. It will be my daily and i plan to keep it that way. Its a great fun car and i dont want to ruin that by going mod crazy. Also, only thing i dont like about the car is the all clear taillights, and the stupid blue footwell lights. They come on while you are driving at night and i **** it. So i def need to fix those things.


untitled (1 of 25) by lawrx, on Flickr


untitled (2 of 25) by lawrx, on Flickr


untitled (24 of 25) by lawrx, on Flickr




ON TO TUESDAY. This day was equally as epic as monday. THE WHEELS ARRIVED. THE WHEELS ARRIVED.
And holy fuck are they amazing. Steeb aka 5one did a awesome job on the machine work and lips. Will def be going back to him in the future.

After all the mockups i realized it was one the shallow faces that i used. So all of the clearances will be about .5" further out. Not huge or drastic, but makes a difference, for inner and outer haha. As i was expecting i will need to widen the rear about another full 1''. Nothing major, original plan was to make the car fit the wheels anyway.

untitled (4 of 25) by lawrx, on Flickr

untitled (3 of 25) by lawrx, on Flickr

untitled (5 of 25) by lawrx, on Flickr

untitled (6 of 25) by lawrx, on Flickr

untitled (7 of 25) by lawrx, on Flickr

untitled (8 of 25) by lawrx, on Flickr

untitled (9 of 25) by lawrx, on Flickr

untitled (10 of 25) by lawrx, on Flickr

untitled (11 of 25) by lawrx, on Flickr

untitled (12 of 25) by lawrx, on Flickr

untitled (13 of 25) by lawrx, on Flickr

untitled (14 of 25) by lawrx, on Flickr



For reference thats an iPhone 6+........8.5" lips.



untitled (15 of 25) by lawrx, on Flickr

untitled (17 of 25) by lawrx, on Flickr

untitled (18 of 25) by lawrx, on Flickr


There really won't be much stretch, less than i was expecting which was good. Hoping to have the tire mounted sometime this week.


untitled (19 of 25) by lawrx, on Flickr

untitled (20 of 25) by lawrx, on Flickr

untitled (21 of 25) by lawrx, on Flickr


untitled (22 of 25) by lawrx, on Flickr


Also got some tow straps in from Speedhunters, along with a new camera strap. I have had the red tow strap for a while as i had planned on using it on the 12 wry, but just never got to it. And on their site the red is no longer available. So ill just use in color up front and other in the rear, no biggie.

untitled (25 of 25) by lawrx, on Flickr

[DER E30]

I just realized you've got rocketbunny flares on overfenders haha AWESOME.

Nice new car, your freakin wheel's half is wider than the tires on the BRZ Again, AWESOME

[evoDRichie]

holy wide! cant wait to see this finished

[laextreme5]

I just realized you've got rocketbunny flares on overfenders haha AWESOME.

Nice new car, your freakin wheel's half is wider than the tires on the BRZ Again, AWESOME

Hahahah i love that gif. Yeah i thought that was pretty funny, the outer lips alone are wider than the brz stock wheels. Had to hold it up next to it for shits and giggles.

[laextreme5]

Made some time tonight to bolt the one wheel all together and seal it up so that i can mount the tire in the next day or so. Still need to drill a hole in the inner barrel for the valve stem. But other than waiting for the silicone to dry she's ready for tire mounting. Not quite sure if I'm going to be able to do it or not. Our machines arm isn't tall enough for these wheels but i can still put it in the clamps and try to man handle it by hand on their. Still going to need a cheetah to seat it all the way because of the slight stretch. We shall see what happens

untitled (1 of 10)-2 by lawrx, on Flickr


untitled (2 of 10)-2 by lawrx, on Flickr

untitled (3 of 10)-2 by lawrx, on Flickr

untitled (4 of 10)-2 by lawrx, on Flickr

untitled (5 of 10)-2 by lawrx, on Flickr

untitled (6 of 10)-2 by lawrx, on Flickr

untitled (7 of 10)-2 by lawrx, on Flickr

untitled (9 of 10)-2 by lawrx, on Flickr

untitled (8 of 10)-2 by lawrx, on Flickr

untitled (10 of 10)-2 by lawrx, on Flickr