To the ground alice!

[Grimoire Greens]

cutting cutting & more cutting

so i wanted to go for a test drive and made it 5 feet before coming to the conclusion that it wasn't drive able because

the rear fender wells were basically sitting on the tire. so i decided to cut more of my fender wells out

this was before


you can already see where i cut to make more room
this is after





cut this too whatever it is





so the car basically no longer has wheels wells anymore but im not rubbing.

took it for a test drive to drop of some mail and its driveable.

but...

exhaust drags consistently but even scarier

the car is sketchy because it sways left to right while driving even at low speeds.

did this before i went lower but not as drastic as it is now.

so if anyone has ever experienced this now would be the time to give me a shout out for solutions.

most likely it needs an alignment badly because well the car has never had one lol.

[Loaf31]

I love everything you've done with this thing, Mark
I kinda liked the roof racks, but that's probably just cause' I have some lol.
Looking clean, but ratty (in a good way) at the same time.
I see you went with the First Moulding lip! Looks tits man. Your only concern will be destroying it on something, seeing as it has a high-ass pricetag.
Keep up the good work, man. You're an inspiration

[Loaf31]

the car is sketchy because it sways left to right while driving even at low speeds.

did this before i went lower but not as drastic as it is now.

Sounds like replacing the sway bar bushings might help in this department. Maybe upgrade to a thicker front sway bar. Not sure if the Si has a front bar. also maybe a strut bar would help?

[VanDamage]

The flares and taking off the roof rack made me not totally h.a.t.e this thread/car. But it actually looks like it's on the way to being good, carry on.

[Queef|Chief]

putting in some work i see! those those lca forks are sweet! glad a company finally went and made some!

[pl43]

I love this build. 😂
It is entertaining and makes me giggle.
No ****. Keep on rocking

[cwspellowe]

To be honest, Hondas have never really done it for me. BUT.. I can completely relate to the build you're going for. I had a Peugeot 306 estate I did the exact same thing with, doing it my way and fuck everybody's opinions. It was an absolute hoot and probably the most enjoyable i'd ever found working on cars.

At the end of the day, you're in it for you. If anyone wants to come along for the ride then great, if not that's their prerogative. Don't stop being you though dude.

[Loaf31]

What happened to the KMC's? Now that you have the flares, you should try and throw those on if you still have them

[FunfGang]

Would look a lot better imo if you took some of the rear camber out to make the fitment better.

[Grimoire Greens]

What happened to the KMC's? Now that you have the flares, you should try and throw those on if you still have them

trust me the thought did occur to me several times... but with this car i diddnt wanna be low on little tires like alot of other peoples builds

i want to be low on beefy tires

but i still have the KMC's i did this for shits and giggles like a month ago

just a little test fit. but they didnt fit lol

[Loaf31]

trust me the thought did occur to me several times... but with this car i diddnt wanna be low on little tires like alot of other peoples builds

i want to be low on beefy tires

but i still have the KMC's i did this for shits and giggles like a month ago

just a little test fit. but they didnt fit lol

Mommy

[Loaf31]

My body needs updates

[CraigSnedeker]

I love me some beefy tires

[Loaf31]

Mark, cmon' my friend. you gotta update this for me

[I_Haz.:R32]

so many facepalms in this thread. I kept hoping for some legitimate mods and then I was let down every time... the only thing you did right was the MPC drop forks, and selling the white crx w/ b16 before you destroyed it.


smh.