Kaido Crown

[AccordEuro]

Following this ever so keenly.

Also, I was wanting to ask, would your mate be willing to make another set of those exhaust tips for le monies?

[P78]

lack of updates disappoint me

you got that exhaust fitted already?

wheels?








jk

[T1Riley]

That grille!
Where would one find something as flash as that?

[Thom]

Wheels still not fitted.............. HTFUm8

[MommysLittleMonster]

Roman, I'm deeply concerned for your selection of wheels you'll be using on your vehicle. Based on my research, you will not be able to safely fit anything wider than a 6" wheel on your car, otherwise you run the risk of poor alignment specs that will prematurely wear out your tires. Might I suggest a nice set of Konig Afterburners or ASA Sport wheels? A nice set of hub caps would look great too.




But seriously, keep it up. We're all pumped to see the madness unfold.

[180roman]

Following this ever so keenly.

Also, I was wanting to ask, would your mate be willing to make another set of those exhaust tips for le monies?

Thanks.

Not sure, it takes a lot of time to make something like that as it is TIG welded by hand, so he would probably want a fair amount of money for the work involved.

lack of updates disappoint me

you got that exhaust fitted already?

wheels?








jk

Nope, nothing has been done on the Crown... just some little things on the 180..

That grille!
Where would one find something as flash as that?

I imported this grille from japan and they are not cheap thats for sure. Some go for as high as $400-600.

Wheels still not fitted.............. HTFUm8

Nope, I don't work on cars, just dream about things...

Roman, I'm deeply concerned for your selection of wheels you'll be using on your vehicle. Based on my research, you will not be able to safely fit anything wider than a 6" wheel on your car, otherwise you run the risk of poor alignment specs that will prematurely wear out your tires. Might I suggest a nice set of Konig Afterburners or ASA Sport wheels? A nice set of hub caps would look great too.




But seriously, keep it up. We're all pumped to see the madness unfold.

Ha ha when I show people the photo of the camber trial fit they think it won't roll

I am working heaps, so struggling to get time to work on the car, but I have organized a get together working party planned for Nov 9, so should be able to take out the suspension and lay it out on the chassis to see what kind of clearance issues I will be facing.

[244Brick]

Roman, I'm deeply concerned for your selection of wheels you'll be using on your vehicle. Based on my research, you will not be able to safely fit anything wider than a 6" wheel on your car, otherwise you run the risk of poor alignment specs that will prematurely wear out your tires. Might I suggest a nice set of Konig Afterburners or ASA Sport wheels? A nice set of hub caps would look great too.




But seriously, keep it up. We're all pumped to see the madness unfold.

you're joking, but people actually think like this LMBO

[BenVAG]

you have my interest and respect.

sub'd

[floatingdino]

I am working heaps, so struggling to get time to work on the car, but I have organized a get together working party planned for Nov 9

Nov. 9? But that's like, a year away!

[keenan]

when this car is finished, i can die peacefully

[180roman]

you're joking, but people actually think like this LMBO

I love it when I actually meet people who think like that

you have my interest and respect.

sub'd

Thanks

Nov. 9? But that's like, a year away!

So.. apparently it's been like a year already...

when this car is finished, i can die peacefully

Hopefully this car doesn't cause any deaths...



UPDATE: There is no update I lied....

God is working against me.. he really doesn't want this car slammed....

It is fucking cold, windy and raining today, the day that I was meant to slam the fuck out of it...
I have to work on the Crown outside coz it is too long to work on it in the garage.

So I had to cancel the Crown Slam-Fest and re-schedule for next weekend.

I did however make some progress in tracking down spare parts.

A mate of mine used to live next to a guy who had a Crown sitting in his backyard. So he asked if we could have it and the guy said yes.

So now I need to pick it up and strip it off all useful parts and scrap the shell.

[CrackerTeg]

That is a horrible update. I am disappoint.

[180roman]

It appears I have found a matching set of wheels for the Crown in specs even more epic.

15x10 -39, 15x12 -78







Unfortunately I can't afford them

Still need to order the under spoiler and a big wing too

[floatingdino]

Wasn't there supposed to be a slammed Crown in this update?
1/10, would unsubscribe

[Thom]

NO. Fuck you and mount/slam the car already! This is to epic to not hurry up! Dont let campbell newman scare you into not venturing below 100mm of clearance. Fuck that guy. Just hurry up already

I mean that in the nicest way possible :P