Kaido Crown

[180roman]

You'll need a tall tire, unless you're planing to drive on the inside of the wheel with that amount of camber.
I bet it will look awesome in the end, ill keep an eye on this.

The camber might end up a little more timid, only time will tell though, pretty sure I'm the first to attempt to modify the Crown semi trailing arms to gain more camber

if you can make those 15x12's fit. i will fly to your country. find you. and give you a really big hug

I will not rest until it fits lol

i will paypal you 5 bucks if you can get those bitches to actually fit. complete with GOOD quality youtube video of them in action lols

ha ha I'll do 1 burnout and then I'll wear through the sidewall and need new tires

I beeeeleeeeeeve

I wanna see this thing finished. Gonna look badass on these 15x12s!

Thanks

Ok I lied. I'm kind of impressed. I seriously can't wait to see this.

Thanks Ashton

when i first mocked them up and an image of the final product flashed in my imagination and i was like

I think like -10 degrees camber and pull/ roll will look better.. I want to see bozo son

I will be flaring the stock metal guards a bit, but there is only so much that can be done to fit that much poke

Camber should be more mild than what it was in the photos, but i won't know how much until I try

do work roman

trying to sign up to a club for club reg

[244Brick]

you'll have to get LONG bolts and bore out the holes a tad.. I have to do the same for my Kia

[aLaFleur]

Thanks Ashton

when i first mocked them up and an image of the final product flashed in my imagination and i was like

I know this feeling all too well.

[SD202]

in for oni camber !

[180roman]

you'll have to get LONG bolts and bore out the holes a tad.. I have to do the same for my Kia

Nah it should be alright, i might need a hub bore spacer as I think the bore on the wheels is a little too big, but the standard studs and wheel nuts fit pretty good.

I just really want to make sure the wheels are supported by the hut center and not the wheel studs as at that kind of camber I fear for their well being...

I know this feeling all too well.

dem feels

in for oni camber !

[244Brick]

No, i was speaking about the camber on the hubs... is this torsion beam?

[180roman]

No, i was speaking about the camber on the hubs... is this torsion beam?

Oh nah,

This one is a semi trailing arm IRS
So I'm just going to cut and shut the arms to achieve the desired camber

Might get some tubular arms made if I need to, as currently i don't like the shock mount position...

[coronawags]

This should be cool Roman, making me think i should get the mx63 back in the garage and get to work.

[T1Riley]

Yes yes this is awesome yes

[244Brick]

Oh nah,

This one is a semi trailing arm IRS
So I'm just going to cut and shut the arms to achieve the desired camber

Might get some tubular arms made if I need to, as currently i don't like the shock mount position...

O ok LUCKY.. I would definitley look into the custom tubular setup with adjustable mounts

I have to do the same for my Kia

what is that, Camber?

[180roman]

This should be cool Roman, making me think i should get the mx63 back in the garage and get to work.

Yeah should club reg the MX63 man

$140 per year for reg is BOSS

Yes yes this is awesome yes

Thanks

O ok LUCKY.. I would definitley look into the custom tubular setup with adjustable mounts

I'll be buying a pair of standard one for spares and just getting these cut and shut to desired specs.

Then once i figure out the exact setup alignment and good friend of mine is an awesome welder and fabricator, he made be those star pipes and he said he will do any fabrication work for the Crown free or at cost price as long as I promise to stick to the plan and make it stupidly ridiculous

[rom2nv]

this is fucking cool!!!! can't wait to see it fitted with tyres!

[milano_red]

Moar!!

[180roman]

this is fucking cool!!!! can't wait to see it fitted with tyres!

Thanks

Moar!!

Might play with it tomorrow and trial fit the front wheels

Really want to take out the springs and see how low I can drop it straight down

[180roman]

Been working heaps trying to pay off my wheeling bills, so the Crown didn't get much love.

But parts have been trickling in, so far I got the parcel shelf speakers and the sub/amp, which I hooked up to my PC until I can get the Crown registered.







Also the new fog light grill arrived which is fucking awesome.