1987 Monza Blue Mk2 Golf 16v

[LukeyBabes]

Finished off my sub box today. Very pleased with it. I hid the amp under the rear seat. Don't really like it there because its making it bulge on the drivers side. Might move it to the middle actually, now I think about it.









Also I went to London the other day and I couldn't come back without bringing my Golf a present. Please ignore the filthy car and coolant leak. The hose clamp on the small pipe from the rad to the expansion tank is misshaped.



Not sure if I like it. Maybe It will be better with a Red stripe.

[NeilP]

This is so clean. Love everything about it!

[LukeyBabes]

Thanks Neil

Much better. Might rock it for a bit. But might put the spots back on for winter if the lights are really bad.

[QT-220]

Yeah, you should really keep both setups.
I used to swap them every now and then, which happened to be every other month.

In winter time usually dual light though.

Is your handbreak working properly?

[LukeyBabes]

Yeah, you should really keep both setups.
I used to swap them every now and then, which happened to be every other month.

In winter time usually dual light though.

Is your handbreak working properly?

Yeah no doubt that I will be keeping the quad light grill to swap when I get bored again.
Yeah my handbrake works. Why?

[QT-220]

Winter+short mk2k+porper wokeing jandbreak=fun

Or is there no snow where you live?

[chucksmith]

looks fantastic my man. i dont really post here very often but i just had to commemorate you on the attention to detail. top notch stuff. its all in the details.

[LukeyBabes]

Winter+short mk2k+porper wokeing jandbreak=fun

Or is there no snow where you live?

Don't get much snow no. couple of days a year if we are lucky. Won't be pulling the handbrake on this car though.

looks fantastic my man. I don't really post here very often but i just had to commemorate you on the attention to detail. top notch stuff. its all in the details.

Thanks. Appreciate the effort then lol.

[viken]

Love these things, super nice and clean, great job!

PS. fap fap fap

[STU?]

Thanks. Im really wanting some heated seats. Good luck with yours. You got a thread?
.

I got the switch from someone on ebay who is also on ed38 he gets quite a lot of little rare bits and switches, the mk3 loom plugs into it and you can wire it in with a few mods I haven't properly looked into it yet but I cant see it being a hard job. My plan was get some mk3 heated seats as them come with the relays on the bottom and take the heat pads out and fit them into mk2 seat pref recaro when I eventually get some sorted.

Also an idea on your amp placement , I had mine mounted behind my rear door card so in the quarter make a few brackets up and you laughing

Thanks mate I need it just started a decent full time job after the past 5 years at college/uni so I will be able to get cracking with money coming in. I have a build thread on a local forum but I haven't updated for a long time , im gona put something together when I make some decent progress

[LukeyBabes]

I got the switch from someone on ebay who is also on ed38 he gets quite a lot of little rare bits and switches, the mk3 loom plugs into it and you can wire it in with a few mods I haven't properly looked into it yet but I cant see it being a hard job. My plan was get some mk3 heated seats as them come with the relays on the bottom and take the heat pads out and fit them into mk2 seat pref recaro when I eventually get some sorted.

Also an idea on your amp placement , I had mine mounted behind my rear door card so in the quarter make a few brackets up and you laughing

Thanks mate I need it just started a decent full time job after the past 5 years at college/uni so I will be able to get cracking with money coming in. I have a build thread on a local forum but I haven't updated for a long time , im gona put something together when I make some decent progress

I did think about putting the amp behind the rear doorcard but thought it will be a bit of a pain to get to to adjust settings. It's ok under the middle of the rear seat now.

I was wondering if the mk2 switch is the same plug as the mk3 one. Cool. Might have to buy a mk3 setup then. And then try and find a good switch.

[STU?]

thing my mate who shares my lock up has a mk3 seat loom from his old valver going spair .. check out our fb page if you click UnderStated on my sig and drop us a message

[LukeyBabes]

thing my mate who shares my lock up has a mk3 seat loom from his old valver going spair .. check out our fb page if you click UnderStated on my sig and drop us a message

Ah cool, I already liked that page. Just sent a message. Thanks

[Miles.]

I really liked the dual light setup on this, which is strange because I normally detest it.

[LukeyBabes]

Quads are back on now anyway. lol.