just another static truck in the making

[Belvader]

And as far as I'm concerned I got my height perfect (for my liking that is)

Got the new blocks ordered and on the way, and these will fix my pinion angle. After that I have just a handful of things to do to this old hag before I'm calling this build finished. I have never been able to say that before and damn does it feel good

[Belvader]

Do this may not seem like much of shit to slit of you but I a make-shift tow hook up front

It actually works as well, I honestly didn't think it would with stand the weight of the truck because I just threw it together but it held its own when pulling the ranger so I'm happy with it.

[Belvader]

shit sorry looked like poney wheels, either way they will look killer, though i am a fan of the steelies you have on there, and wowsa thats a lot of block! can you not get hangers shackles or drop leafs? i have a set of 2 inch blocks but that was just to level her out for a brief time, im hoping to eliminate the block almost entirely. keep it up though dude looks awesome.

Thanks brotha! And I do have a flip kit with lowering springs and all... It just wasn't low enough so that when I resorted to the excessive blocks

[dubstance98r/t]

shit sorry looked like poney wheels, either way they will look killer, though i am a fan of the steelies you have on there, and wowsa thats a lot of block! can you not get hangers shackles or drop leafs? i have a set of 2 inch blocks but that was just to level her out for a brief time, im hoping to eliminate the block almost entirely. keep it up though dude looks awesome.

[Belvader]

thanks man, but sorry their not mustang wheels yea there 3inch blocks stacked on a 1inch blocks. and a flip kit has already been done.

[dubstance98r/t]

this is gonna look killer, especially with those mustang wheels, you def need the notch...are those 3 inch blocks? look into getting a flip kit, or new hangers and shackles, i have 2 inch blocks on mine that i plan on removing, i have a set of 4 inch shackle hangers im putting on and then maybe keeping an 1 or less of the blocks. either way good work bud!

[Belvader]

The top of my frame was at the top of my tire

And these are the wheels I was talking about, I'm gonna be getting some 225/40/15's for them and with the new height and everything I will be tucking wheel

[Belvader]

So I said screw the notch for now, and took out the bumpstops and went ahead and dropped it. Now I have a 9" drop in the rear. I'll put up some pics later but you can check some out right now on my IG @true_jsmith

[Belvader]

yup yup notches still going down, just waiting on my dude to weld in the reinforcement plates after I cut out the notch so its stable

[244Brick]

Aw you suck.. notches still happening?

[Belvader]

As you all asked for, new wheels are to come. Their not gonna have hella offset but it's gonna be flush. No hints, pics or anything until I get some tires on them and get them mounted.

[Belvader]

tinted the 3rd all red

so like i said im bedless for winter now

the 4 panel in the ranger

my inner cooler

mocked up

thats all for now, but i should be getting the frame notched this weekend so more lows quite soon

[Belvader]

Just picked up an inner cooler... Nuff said

[Belvader]

Ran across my 4 panel mirror in the shop today and went ahead and put that in... Would post up a pic but imgur is being a doo doo face

[Belvader]

500 whp on front wheels.. just so it can switch lane by itself when turbo spools at 6000 rpms and hits 9krpms on-the-spot...

Keep the truck, much more original.. Slammed civics are everywhere.

trust me dude im keeping the ranger, I was actually lurking through your thread when I decided to text my dude with the civic and tell him im backing out on the trade.


and I actually got some small stuff done to the ranger for a change.

I tinted the 3rd brake light all red

and I went bedlss in prep for doing some rear end work

sorry there was no pics, imgur is deciding it doesn't want to work for me anymore sssooo I guess im gonna make a flicker or something of that sort