No matter what I do, it's still a Cavalier.

[HooWybrow]

Does this mean you will be at H2O? DOES IT?

I've been there the last two years, why would I miss it EVER AGAIN?!

:ROFL not that bad aye? You a baller shun!



Man, don't be using my name out n dese sckreets! Them popo's be watchin!

Haha, ballin' on a budget. Sorry, uh... guy-whose-name-is-not-Eugene.

Pls.

Thxbai.

That dash came out GREAT ! and i cannot wait to see that seat installed. I know you're not gonna like this but im bagging my w202 , Why. Because i need something else to test what i can and cannot install on my car myself from my chair. Sounds silly but I wanted a project to tackle along with achieving more lows. There is no other way. unless i learn how to weld / fab sheet metal which i NEEED to do.

That has been my entire premise on this build, dude. Just to see if I can do it. I've got so much respect for you trying whatever you try. You continue to be an inspiration for me to not give up.

[SD202]

That dash came out GREAT ! and i cannot wait to see that seat installed. I know you're not gonna like this but im bagging my w202 , Why. Because i need something else to test what i can and cannot install on my car myself from my chair. Sounds silly but I wanted a project to tackle along with achieving more lows. There is no other way. unless i learn how to weld / fab sheet metal which i NEEED to do.

[Kyle_Eagleton]

Does this mean you will be at H2O? DOES IT?

Pls.

[244Brick]

:ROFL not that bad aye? You a baller shun!



Man, don't be using my name out n dese sckreets! Them popo's be watchin!

[M.Doban]

Does this mean you will be at H2O? DOES IT?

[HooWybrow]

Damn, I remember your first post on jbody, public reception sure has changed. Lovin' the work you've put in, hopefully ill get to see it in person someday. I still have a soft spot for j's.

Haha, yes I agree. It sure has changed.

It will be all over hells half acre next summer!

Upset that this wont be at SOWO.

Not even gonna go anymore.

Like I said to Eugene, I'd rather spend the time this year and finish it rather than trailering it all over North America. I'll get to drive it everywhere come July/August/September this year.

Stayed up pretty late last night writing down what I needed to all buy to get it to a point where I'd be happy calling it 'done' for the year and financially it is not as bad as I had originally anticipated. Don't get me wrong, it's still pretty bad, hahaha.

[mrkrinkle]

Upset that this wont be at SOWO.

Not even gonna go anymore.

[e.mury]

Damn, I remember your first post on jbody, public reception sure has changed. Lovin' the work you've put in, hopefully ill get to see it in person someday. I still have a soft spot for j's.

[HooWybrow]

Well that's alright, I just didn't know what I should be looking to pay for some seats. Are you just going to make your own mounting brackets?

I'll be making my own brackets, for sure.

Dash looks great! Keep up the great work!
I always thought that steering wheel was super ugly but hey, it's great that you'll eventually switch it out.
I don't know what it is but something to do with the bulky square that's connected at "4:30 and 7:30".
Yeah, I can't explain it haha.

The steering wheel is less than desirable, that's for sure. Like I said, though. It's just there to "look finished".

Got some big news the passed few days. Not allowed to share just yet, but I assure you it's amazing.

Car NEEDS to be done for July, so I'll be going hard at it (that means nightly updates again) until then. Can't wait to miss a great deal of sleep.

[Tomahawk]

Dash looks great! Keep up the great work!
I always thought that steering wheel was super ugly but hey, it's great that you'll eventually switch it out.
I don't know what it is but something to do with the bulky square that's connected at "4:30 and 7:30".
Yeah, I can't explain it haha.

[Bigdogstokes]

I'm picking up the seats used, only a season one them. So, I can't really help you there.

Well that's alright, I just didn't know what I should be looking to pay for some seats. Are you just going to make your own mounting brackets?

[HooWybrow]

that dash looks sweet. I like the hidden booster setup. gonna be fun for filling brakefluid though :]

The fill cap is right in the upper, center vent.

How often do you guys fill your brake reservoirs? Yeesh.

you have some skills! this is actually sick!

Thanks, dude!

Just thought if hop on over and post in your thread for once instead of IG. BEST CAVALIER EVER!!

Haha, thanks, Kyle!

This project never fails to impress me. I continue to come back every day to see any update on it. It gives me so much inspiration to work on mine. I would post a pic but it would look mighty embarrassing with the rust and monster truck gap. But once I get my coils it will be looking better I hope. The dash looks amazing with those gauges mounted into it. And one last thing, how much are the seats going to be because I know I'm getting some eventually. Thanks in advance!

Thanks a bunch dude, that was really nice.

I'm picking up the seats used, only a season one them. So, I can't really help you there.

Nice work, Jeff. I've enjoyed the Hell out of this car and the truck for some time, now.

My dude.

Went out to the shop with pure intent to finish cleaning up after the tornado that went through the last couple weeks. Cleaned for an hour or so then got distracted and somehow wound up starting on this years skid plate.

It is, basically, going to be an extension of the factory subframe, connecting to the front rad cradle, with the entirety of the drivetrain covered.

My cousin folded up these pieces for me (I've had them going on two months and have been focused elsewhere).




I traced the factory dogbone lower engine mount onto one end of each, and drilled and radiused them, and then cut them to length.





It's hard to picture it now, and unfortunately I didn't get to go any farther last night as this took entirely too long (I need a mill).

If you can picture it, these will extend from the subframe, with a big plate in the middle, that will also extend into the center of the subframe. I'll be mounting my catch can, meth pump and using this as my dog-bone mount bracketry aswell. It will be quite the sight when finished.

[cobrawannabe]

Nice work, Jeff. I've enjoyed the Hell out of this car and the truck for some time, now.

[Bigdogstokes]

This project never fails to impress me. I continue to come back every day to see any update on it. It gives me so much inspiration to work on mine. I would post a pic but it would look mighty embarrassing with the rust and monster truck gap. But once I get my coils it will be looking better I hope. The dash looks amazing with those gauges mounted into it. And one last thing, how much are the seats going to be because I know I'm getting some eventually. Thanks in advance!

[kbuss]

Just thought if hop on over and post in your thread for once instead of IG. BEST CAVALIER EVER!!