MA70 2jz 700whp please build/ stanced out

[K_shan]

so heres a cleaned up better one

i have a 1987 toyota turbo mk3 supra(targa top).. or MA70 *gasp*

its a 2jz-gte big single swap

mod list...


Motor
- USDM 2jz-gte swap
- je pistons
- eagle rods
- arp headstuds
- driftmotion 50mm wastegate
- t76/69ar godspeed
- drift motion exhaust mani (modified)
- 3in custom downpipe
- custom 3in exhaust


Drivetrain
- R-154 asin trans
- 1jz bellhousing
- 1jz fidanza flywheel
- act street disc

Cooling system
- mishimoto oil cooler
- driftmotion oil catch can
- koyo aluminum race radiator
- ebay 3in intercooler

Fuel system
- braided stainless earls fuel lines -10 an
- braided stainless return line - 6 an
- titan motorsports dual feed fuel rail
- 1250cc bluemaxx injectors
- custom sumped stock fuel tank
- aeromotive fpr
- aeromotive elimanator fuel pum

Electronics
- aem ems
- zetronix a/f wideband/data logger
- glowshift boost
- greddy turbo timer
- CUSTOM usdm 2jz-gte wire harness
- custom chassis harness
- aeromotive voltage regulator

Interior
- taiwan bride seats
- sparco harnesses
- 6point roll cage
- custom chassis harness

Exterior
-tsw thruxtons (18s) <<<< gay
-rears - mickey thompson dot drag radials (245/40/18)
-front -federals 225/40/18

Suspension
- STANCE GR+ coilovers
-

MISC.
- Beech ps reserve with braided lines

Future mods
paint.
some ccw's
aero from shine autoproject


ya thats bout it... oh and no its not running yet haha




what it was before the operation

[K_shan]

heres the update. i tored insides up and am redoing it she will be stripped(done) and painted. and some other things as well. so far ive shed ridiculous amounts of weight from the car (ill be modest an say 200lbs) the car weighed 3300lbs when i first got it with a buddy inside...

so the power to weight will be nice

PICS (sorry kinda blurry )





all HVAC and sound deadening material is gone ( she will be hot an will be loud, but its a track car an idgaf! )
intercooler piping being mocked up by the guys at BLacklist aka (mike and jake)


more updates this weekend

[K_shan]

3pce tails!

fixen the ugly old trim on them

playin with the turbo clocking and fittings

blacklist motorsports Jake modified the turbo flange for me.



the set up

oil cooler setup


HKS twin power via titan motorsports


changed the interior to black!


new intercooler piping setup curtesy of Blacklist and powdercoating by MODA metals

[K_shan]

jake from blacklistMotorsports building downpipe





fixing some of Spikeys little awesome modifications to the throttlebody lol


99% finished 3in DP


oh a fuel rail? and turbo mounted?


titan dual feed fuel rail with 1,250cc injectors from injector clinic




oh and u havnt seen a fuel pump till uve seen this one lol

[K_shan]

well cage is pretty much done minus the door bars

it turned out way better than i thought. jake is a amazing welder.

anyways enough talking more PICS!

[K_shan]

exhaust almost done. its 3in strait back, havnt decided what im doing tip/muffler wise yet

[K_shan]

slammed it for testing.. i **** it that low so back up it comes

[K_shan]

lots of work lately.

at the moment im working on chassie wiring.

enuff talk more pics!









engine harness progress pic number 2.


chassie wiring progress pic 1

[K_shan]

before

after


interior after


engine all wired uppp





good enought tuck for all of you guys? eh?

[K_shan]

ok well during the period of building/fabricating. my engine bay paint got pretty screwed up. so heres some updates

stripping down


All empty.

IMG URL.

We have about two days in filling holes with pates we welded in and fiberglassed, then some filler to smooth things out then masked up the car so i could prime the engine bay. This helps to expose some body work that still needs attention to get'r perfect. So, here are some pic to ooogle over.

[K_shan]

the paint color is labrador black/ tarmac black

its from the mitsubishi evo8
enjoy

PAINT!!!!!!

FRESH TARMAC?!?!
[/quote]


freshh paint the dimples can be caused by alot of different things, most commonly dust, and that paint hasn't been cut and polished, its just as was sprayed.


Some more progress has been made this fine evening. we got the subframe put back in the car and mounted the intercooler and oil cooler and started buttoning up the wiring in the engine bay and put the fenders and header panel on. So, some pics are due.

[K_shan]

thats the current build for me will update often

[kevinc]

this is sick. good work.

I'm assuming after all is said and done that new wheels will be coming?

[K_shan]

oh ya. i have a few sets coming. one for drag. and then one for stance

the tsw's are just roller wheels. ya gayyyy as fuuuuuuu haha

[kevinc]

hahaha sounds like a plan