Whitehorse ind - Three piece wheels

[dylan8]

I've got some 17x5.25 LE barrels if thats any help?

[hakhawk]

What sort of Simmons? FR17?
I have 2 - 17 x 4.5" inner barrels for FR17.

le17, i think the barrels are the same, just different amount of holes.

4.5" is too small anyway

i'll just have to wait til after i get the car back, measure the crap out of everything and just get some made

[Craig Winters]

long shot but was there any simmons 17" barrels in the stockpile? 7-7.5"

i know its too late to try and order for 100mm, but i cant measure up 100% until i get the car back anyway

that size would work going by my rough calcs, might as well try my luck if theres something floating around

also doing the ebay and gumtree dance, see what i can find.

What sort of Simmons? FR17?
I have 2 - 17 x 4.5" inner barrels for FR17.

[hakhawk]

long shot but was there any simmons 17" barrels in the stockpile? 7-7.5"

i know its too late to try and order for 100mm, but i cant measure up 100% until i get the car back anyway

that size would work going by my rough calcs, might as well try my luck if theres something floating around

also doing the ebay and gumtree dance, see what i can find.

[aminninja]

hey craig here are my measurements



hope we can get this sorted out and i sent you an email as well just in case

[aminninja]

Did you get an email back from me. I have changed pc's and haven't moved my emails from old computer to the new one

hi craig.
i thought this thread is dead oh btws i didnt get your email back since july 27th. but i will resend my dimension of my wheel latter this evening .

[SebastienPeek]

Yeah, the majority of lips were all above 3", I think there might have been maybe one or two hiding that were less.

As for holes, Craig doesn't drill them, you gotta do that.

[Oxer]

any 16x2" bbs rs 36 hole lips seb?

Dont think theres anything less then 3inch haha

[andrewn]

any 16x2" bbs rs 36 hole lips seb?

[dylan8]

ah completely forgot.
yeah iv seen some of it before.
will have to go look see if there is anything that'll work for any of my current builds or ones im helping with

[SebastienPeek]

Yeah we did!

There's a massive stockpile upstairs you might be interested in going to see Dylan

[dylan8]

did you guys end up going down?

[SebastienPeek]

^^ Agreed

[Oxer]

Any places in Vic that would actually spin them on a lathe to remove the lip?

Im 50/50 at the moment on buying the lips next year from Whitehorse industries, but just need to know if its doable other wise, if i cant split them than its a no go

It can be done, it just means that the old lips go in the bin. Alternatively for roughly a couple hundred more per wheel Whitehorse can make barrels too, so if you ever resell the wheels the next person has options if the widths you build dont fit. Depends on budget. Considering a machine shop will prob charge between 50-100 to machine the lip off, id personally just buy barrels.

[SebastienPeek]

Aha okay!