Announcement

Collapse
No announcement yet.

Whitehorse ind - Three piece wheels

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Byron
    replied
    Can you step wheels up in size? For instance, take a 3 piece 17" wheel and replace that lips and barrels to make them 18"?

    And are reverse lips and different price-wise? I could be interested in a set of 3.5x18"

    Leave a comment:


  • hakhawk
    replied
    what sort of price would i be looking at for some 15"x 4-5" inners and outers to suit simmons v4's?

    Leave a comment:


  • .Ryan.
    replied


    oxer tried his best to make them fit




    they do look fkn cool with that much dish on the back


    Leave a comment:


  • shinny
    replied
    Originally posted by Craig Winters View Post
    you are right. i am working on some at the moment.
    craig. whats the cost to get 2" wider outer lips spun out for the ssr sp1? there 15" wheels

    Leave a comment:


  • seventhskyline
    replied
    Yeah I think what you've got tooled looks pretty close. I'll get in touch as soon as I get time to strip them down.

    Leave a comment:


  • Craig Winters
    replied
    Originally posted by seventhskyline View Post
    Oh this is very interesting, I have some 3 piece 13x8 Volk Mesh I want to widen to 13x9J with new outer lips (to match the 13x9.5J rear pair), I will have to get in touch!

    So Craig, you can't supply them drilled, just spun and machined to size?
    If I send you an outer lip can you work from that as a template? Or an outer lip and a centre?
    correct. just spun and machined to size.

    send an outer and centre. the shape of the wheel will match our tooling. it may not be the same as your volk mesh.

    Leave a comment:


  • Craig Winters
    replied
    Originally posted by 180roman View Post
    SP1s only skip like 2 bolts per spoke, so you can just re-assemble them as 3 piece wheels without any leaking problems

    or if i remember correctly there are holes in the back of the spokes which you can tap a thread into and use short bolts from the back of the wheel(not 100% might be mixing them up with some other work or ssr wheels)
    you are right. i am working on some at the moment.

    Leave a comment:


  • seventhskyline
    replied
    Oh this is very interesting, I have some 3 piece 13x8 Volk Mesh I want to widen to 13x9J with new outer lips (to match the 13x9.5J rear pair), I will have to get in touch!

    So Craig, you can't supply them drilled, just spun and machined to size?
    If I send you an outer lip can you work from that as a template? Or an outer lip and a centre?

    Leave a comment:


  • shinny
    replied
    Cheers bro.uch appreciated. Gunna check out the wheels today n make up my mind. Do u know roughly how much per wheels the lips would cost?

    Leave a comment:


  • 180roman
    replied
    SP1s only skip like 2 bolts per spoke, so you can just re-assemble them as 3 piece wheels without any leaking problems

    or if i remember correctly there are holes in the back of the spokes which you can tap a thread into and use short bolts from the back of the wheel(not 100% might be mixing them up with some other work or ssr wheels)

    Leave a comment:


  • shinny
    replied
    cheers. are there possibilities of widening the outer lips and rewelding it back to the orginal barrel or do a new barrel and lip need to be made up?

    Leave a comment:


  • 180roman
    replied
    SSR = 3 piece but the barrels are welded together

    Work = true 3 piece(except for VS-KFs which are welded barrels coz the bolt pattern has gaps)

    Leave a comment:


  • elitee
    replied
    Originally posted by Oxer View Post
    depends, are the centers removable?

    Technically yes, just more expensive.
    Not a 100% sure, some say there 2 some say there 3 piece.

    They are rays vr x10.

    Leave a comment:


  • shinny
    replied
    Originally posted by Oxer View Post
    ssr sp1 or work meister?
    sup ox

    there ssp sp1-r. should b 3 piece wheels

    Leave a comment:


  • Oxer
    replied
    depends, are the centers removable?

    Technically yes, just more expensive.

    Leave a comment:

Working...
X