Custom AIr Tanks ?

[vdubin]

Hydrostatic testing DONE, PASS, A+ .

150psi.


190psi !



Top Tank


Mid



Bottom


Little tank

[vdubin]

looks insane, how will you go draining them of liquid/ moisture?

Thanks.
well these little suckers will help (stop) some moisture.


As for Draining Thats a good question haha
The Bottom tanks getting a re-design I jumped the gun way to quick & wasnt thinking,
I dont need the Four exit hole on the front because I have this



....Im Suck a dickhead.

[xpeesx]

looks insane, how will you go draining them of liquid/ moisture?

[vdubin]

^^ Wondering this as well. Looks awesome though!

Getting on to that this week.

Im thinking about powdercoating the tanks white ?
Not feeling the raw steel look atm.

Cheers Stance4sissies

[stance4sissies]

I REALLY like this. Very cool.

[Dave_The_BMXER]

Tanks look awesome. Also remind me somewhat of tetris.

[Alex@BagRiders]

nice!!

are they pressure tested?

^^ Wondering this as well. Looks awesome though!

[trism]

nice!!

are they pressure tested?

[vdubin]

Tanks are finished now.




Going for something like this .

[vdubin]

"pressure switches that cut off at 145psi" True I should of guessed that...

That trucks just insane

Well I got my last tank.It's about 100mm to long to fit up against the back seats.
Will cut it to fit.




Now its time to just play around and come up with ideas.
The Spare wheels gone & I have a shit load of room under there.
I could hide almost everything in there if need be.


Also need room for my 12inch Earthquake sub this is a must !

[Francois Dillinger]

Minitruck guys do it too, the frame on this is a tank.

Awesome.

[Jesus Christ]

Swoops is my neighbor and by far one of the best at anything air ride related. I'd talk to him before anything.

[Dave_The_BMXER]

Offroad truck guys pressurize their frames. Not sure if they run 150 PSI though.

Minitruck guys do it too, the frame on this is a tank.

[Alex@BagRiders]

Awesome ! I knew it would of been done before.

"MUST use extremely THICK steel" How thick are you talking ?
The welds will be quality tig welds,and deff getting a pressure test.

I can only run 150psi max why is this,
Im still very new to air, will my compressors turn off at 150 psi ?

Thanks AccuMike im starting on it this weekend !!

You can run different pressure pressure switches that cut off at 145psi, 175psi, 200psi. The pressure switch basically tells your compressors when to shut off so if you run the 145psi switch your tank won't go over 150psi.

[TheNeek]

Offroad truck guys pressurize their frames. Not sure if they run 150 PSI though.