e46 sedan wheel fitment, is this possible?

[JSanders]

Is a 17x8.5/9.5 et13 possible on a e46 sedan?

[JSanders]

I'm thinking it shouldn't be a problem with a little roll, pull, tires and camber. I just want a second opinion.

[Zic]

No problem, don't even think that you need camber. That is e36 wheel fitment, e46 has a little bigger fenders me thinks. Gonna have to use like 5mm spacers or something.
But i'm not 100% sure, so wait until someone with a e36 shims in.

[00bmw323]

yes

[Byron]

It's possible, the back will stick out a bit more and need some camber.

[BreakMyWallet]

lol 9.5 et 13 is passed e46 m3 fitment. so there will be a decent amount of poke. i ran 9.5 et 30 which was as flush as it gets. but yeah you can make it work. def need camber

oh and pulling fenders on an e46 is pretty damn hard to do.

[JSanders]

Yeah, the low offset in the rear is my only concern. BreakMyWallet, do you have any pics of the et30?

[cabezzz]

They will stick out quite a bit, have et22 9.5s on my e36 and they stick out about half an inch

[JSanders]

I'm thinking I make it happen, Stanc3 on e46f was running 19x9.5 et16 on 225's in the rear:

[cabezzz]

Thats the spirit!

[JSanders]

Now I just have to get it done by 512!

[JSanders]

After doing the math, it looks like it should only stick out 6mm more than when brandon was running his style 5's at et0 in the rear, so it should be all good!

[JSanders]

They will stick out quite a bit, have et22 9.5s on my e36 and they stick out about half an inch

Got any pics?

[SeanDub]

Anythings possible.

[Perfect Stance]

I'm thinking I make it happen, Stanc3 on e46f was running 19x9.5 et16 on 225's in the rear:

Thats what I call the Perfect Stance! Sweet tuck N poke