e46 sedan wheel fitment, is this possible?

[Anonymoose]

Here's my 19x9.5j et25 with 225 35 19, lips rolled, standard camber which is pretty flush with semi-stretch. Definitely room for more, do it!



Excuse the dirty ass

[JSanders]

Excellent.

[be-doubleyou]

Its definately possible. I run a 19x9.5 et21 in the rear on a coupe and it just barely pokes with a fender roll/pull and -2.6 camber. I also have 19x8.5 et18 fronts which barely poke with a fender roll/pull and -1.8 camber, so 8.5 et13 will have a nice poke. Its gonna look sick once you get it done.

[BreakMyWallet]

naw dont really have any fitment pictures. heres a couple that kind of show it.

[JSanders]

Anything is possible. I just wanted to make sure I wouldn't have ridiculous amounts of poke, because that's not what I'm going for.

Stanc3's stance is perfect! I hope mine looks as good once I'm through.

[Perfect Stance]

I'm thinking I make it happen, Stanc3 on e46f was running 19x9.5 et16 on 225's in the rear:

Thats what I call the Perfect Stance! Sweet tuck N poke

[SeanDub]

Anythings possible.

[JSanders]

They will stick out quite a bit, have et22 9.5s on my e36 and they stick out about half an inch

Got any pics?

[JSanders]

After doing the math, it looks like it should only stick out 6mm more than when brandon was running his style 5's at et0 in the rear, so it should be all good!

[JSanders]

Now I just have to get it done by 512!

[cabezzz]

Thats the spirit!

[JSanders]

I'm thinking I make it happen, Stanc3 on e46f was running 19x9.5 et16 on 225's in the rear:

[cabezzz]

They will stick out quite a bit, have et22 9.5s on my e36 and they stick out about half an inch

[JSanders]

Yeah, the low offset in the rear is my only concern. BreakMyWallet, do you have any pics of the et30?

[BreakMyWallet]

lol 9.5 et 13 is passed e46 m3 fitment. so there will be a decent amount of poke. i ran 9.5 et 30 which was as flush as it gets. but yeah you can make it work. def need camber

oh and pulling fenders on an e46 is pretty damn hard to do.