Finding 5x108 wheels with the correct specs: Mission Impossible?...

[P78]

have you looked into american wheels?

don't lincoln and mercury run 108??

us guys pls confirm

[Oh Damn, it's Sam]

You cannot use wobble bolts, 4mm is too much of a difference in the PCD.
I believe their limit is 2.5mm

Concur.

[zoo]

have you looked into american wheels?

don't lincoln and mercury run 108??

us guys pls confirm

Some FoMoCo cars use 108.

[Beware]

Check Yahoo Japan Auctions maybe............

If you wanted to go 17's then there's these BBS RX in 17x8 +40 5x108, need a little work, but cheap a starting price, 2 sets available

http://page12.auctions.yahoo.co.jp/jp/auction/p456348520

http://page21.auctions.yahoo.co.jp/jp/auction/j321667628

17in Alfa wheels would be different, a little narrower than you want at 7.5 +41 in 5x108 and starting very cheaply due to needing a little work, 2 sets again

http://page14.auctions.yahoo.co.jp/jp/auction/s438421333

http://page11.auctions.yahoo.co.jp/jp/auction/n143569620

OZ Superturismo same specs as above....these would look mad on an 850 I think!

http://page4.auctions.yahoo.co.jp/jp/auction/d160905568

Most of the 16's I saw when having a quick look on there are all 6.5in or 7in wide, nothing wider.

[BenFenner]

OZ Superturismo same specs as above....these would look mad on an 850 I think!

http://page4.auctions.yahoo.co.jp/jp/auction/d160905568

Doooooo eeeeeeeeeeit!

[SebastienPeek]

I have some Ferrari 348 wheels for sale?

Ferrari 348 Wheels
17x7.5+49 front
17x9+68 rear

Wrapped in near new 205/40/17's up front and 215/40/17's at the rear.

All in relatively good condition, one of them has recently been repainted by Oxer king.
Just bought centre caps for them, expensive dollars, and genuine too.

IMG_1260 by sebastienpeek, on Flickr

Asking $1,800 for the whole set.

Only thing is they're in Australia... If you're willing to pay shipping, they're all yours!

[DC95]

Thanks a lot for all your mad suggestions guys! I'm especially in love with the BBS RX225 wheels on Yahoo, geez they would look mint! As for the ferrari wheels: I think the combined price of them with shipping to Europe is a bit to expensive for me... Good luck with the sale though mate, they look real good!

The Merc wheels wheels with wobble bolts: it should be a fitting combo since mercedes seems to br using 14 mill bolts were volvo uses 12mm, so 2mm is already made up with by using the different sized bolts. I have read some experiences of people rolling on MB wheels with stock volvo bolts, which would work. I personally think this is a solution that puts way too much stress on the bolts...

Thanks guys! I'm finally getting a proper insight in all the possible wheels for my (hopefuly) low swung volvo estate!