Ok, you guys got me thinking the right way....

[JackEatsEmoKids]

So, I ordered black rim bolts for my wheels last night.

I think I'm going to paint them BMW SilverGreyMetallic or try to see if the powder coaters near my job can mix me a color close to it.

What other colors could you suggest? I want to keep it mild looking but still have that w0w effect.

And yes, I will finally run some smaller tires like many of you suggested, only way to get this flush with these wheels. Plus these Michelin PS2's seem to have a HUGE MF sidewall for no reason.

I have a 255/35-18 Falken ZE512 new in my shed, I will run a 225/40-18 in the front. I know these tires run small, it'll give me that mild strecth I want with a still kinda wide tire with spacers of course.

The wheels are 18x9 and 18x10 and currently on Michelin PS2 235/40-18(porsche OEM sized =/ seem to have a taller sidewall than the ones I had before ) and 265/35-18 in the rear.

Here's how the car sits now....gimme wheel color options. The rim bolts will be black and lips high polished.

Thanks guys!

[Han]

Bah, again with the tires that "run small." They only LOOK small, but are still the same size as others. I would suggest a 235/40/18 rear and 215/40/18 front and push them out another 15-20mm rear and about 10mm front.

[JackEatsEmoKids]

Bah, again with the tires that "run small." They only LOOK small, but are still the same size as others. I would suggest a 235/40/18 rear and 215/40/18 front and push them out another 15-20mm rear and about 10mm front.

Well I've put a 255/35-18 Michelin on a 9" rim, it's about flush with the rim, I put the same size tire in a Falken 512, it was strecthed. How is it the same size then? The numbers are the same numbers...but the way it fits the rim isn't the same.

I don't want to run that thin of a tire on this car and nor do I want the rim sticking out of my fenders, I think a 10mm up front sounds great, but a 15 to 20mm in the rear is just wayyyy to much. I had some 15mms with the stocks, I put them on i the rear with this rim I have now, it stuck out like 25mm, I don't want that.

I just want flush...a more clean look.

[e.shell]

heres some ideas :p .

bronze


color matched


light blue


bright green


cyan


and yellow.


gl on choosing! let me know if you want other colors

[e.shell]

whats wrong with that way of coding??? haha

edit: nevermind i got it. its different than vortex.

[Han]

Well I've put a 255/35-18 Michelin on a 9" rim, it's about flush with the rim, I put the same size tire in a Falken 512, it was strecthed. How is it the same size then? The numbers are the same numbers...but the way it fits the rim isn't the same.

I don't want to run that thin of a tire on this car and nor do I want the rim sticking out of my fenders, I think a 10mm up front sounds great, but a 15 to 20mm in the rear is just wayyyy to much. I had some 15mms with the stocks, I put them on i the rear with this rim I have now, it stuck out like 25mm, I don't want that.

I just want flush...a more clean look.

Again, visually, its different, no doubt about that. That is because the way the sidewalls are designed are different. I don't feel like writing it out again, so I'll just link you. Visually, they might be different, but mathematically, they are the same.

http://www.stanceworks.com/forums/showthread.php?t=3114&page=2

[bataangpinoy]

i like the teal, its a nice contrast

[JackEatsEmoKids]

heres some ideas :p .

bronze


color matched


light blue


bright green


cyan


and yellow.


gl on choosing! let me know if you want other colors

w0w...

see what you can do with a silver like this

and white and gunmetal. Thanks man!
Throw out any random things too

[JackEatsEmoKids]

Again, visually, its different, no doubt about that. That is because the way the sidewalls are designed are different. I don't feel like writing it out again, so I'll just link you. Visually, they might be different, but mathematically, they are the same.

http://www.stanceworks.com/forums/sh...?t=3114&page=2

I understand you fully on this. The Falken then has the sidewall I desire to fit my wheels a bit more flush.

[Han]

I understand you fully on this. The Falken then has the sidewall I desire to fit my wheels a bit more flush.

With all this said and your preferences listed, I would do 255/35/18 and 215/40/18 and push the fronts out a bit.

[e.shell]

from the other bimmer


white


kinda gunmetal (came out similar to the other one)

[Han]

I like the dark silver/grey/gunmetal one, a lot.

[NELSON09]

I like the color matched face (or color matched just not metalic) or leave them the way they are...

[schroedin]

Win.

[Wyo_A4]

I like the white! But not sure how it would look with black bolts.

But the darker grey with black bolts would look sick too...