Hi everyone, I picked up a set of Jeep Rubicon wheels for cheap the other day and will be mounting some 205/45/17s so the last thing I need is adapters. I've asked around and done a little research and it seems like 20mm thick is what I should be shooting for but I wanted to know if I need to get hub/wheel centric or if I can just run a standard adapter.
I worked out these on Motorsport-Tech.com:
Or for non-centric something like this:
Also just to be sure does 20mm front and back sound right to you guys? Thanks for any help you can give me!
Oh and here are the wheels:
I worked out these on Motorsport-Tech.com:
2000 VOLKSWAGEN GOLF_GL_-GLS
Your Bolt Pattern: 5x100mm
Your Hub Diameter: 57.1mm
*********************
Type: One Piece Adapter
Hub Centric to Car & Wheel Centric to Wheel
Thickness: 30mm
Stud Size: 12x1.5
Center Bore: 71.5mm
Diameter: 5 by 127 (5 inches)
Quantity: 4
Your Bolt Pattern: 5x100mm
Your Hub Diameter: 57.1mm
*********************
Type: One Piece Adapter
Hub Centric to Car & Wheel Centric to Wheel
Thickness: 30mm
Stud Size: 12x1.5
Center Bore: 71.5mm
Diameter: 5 by 127 (5 inches)
Quantity: 4
Also just to be sure does 20mm front and back sound right to you guys? Thanks for any help you can give me!
Oh and here are the wheels:
Comment