Announcement

Collapse
No announcement yet.

The Headliner Thread

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mrg7243
    replied
    Originally posted by itsjustkevin View Post
    Anyone have any tips on taking the headliner out?



    i did my pillars and other little interior tid bits but the headliner is intimidating to take down
    When in doubt cut it out.

    Leave a comment:


  • itsjustkevin
    replied
    Anyone have any tips on taking the headliner out?



    i did my pillars and other little interior tid bits but the headliner is intimidating to take down

    Leave a comment:


  • Chris_tA_4
    replied
    Cool 'preciate the help. The thing is that I'm getting an image printed on fabric and im not sure what fabric to go with. My options are polyester, nylon, cotton, and silk. I'm thinking about going with polyester. Will i run into any problems with choosing that material?

    Leave a comment:


  • e39hamann
    replied
    Originally posted by Chris_tA_4 View Post
    Quick question...what's the best material to use for a headliner??
    If you don't wanna spend a lot you can get micro suede. I got mine off of ebay and it's foam backed. It also looks much better than most of the stuff in this thread.

    Here's a couple pics, it's hard to get a good pic it though


    Leave a comment:


  • Chris_tA_4
    replied
    Quick question...what's the best material to use for a headliner??

    Leave a comment:


  • skippybigballs
    replied
    Here is mine:

    Leave a comment:


  • firu1
    replied
    where to get these !!!! in EU and on-line ??? stock in bloody island ....any help

    Leave a comment:


  • w201e34
    replied
    Got it in!

    Leave a comment:


  • w201e34
    replied
    Picked up an mk2 gti last week, and the headliner was touching my head haha. So I replaced it with this..


    It was such a bitch getting it out (that's what she said) without having the liner board thing crumble lol. Got the fabric at joanns fabric for like 8 bucks. Then got some 3M spray adhesive for 7. First time I ever did something like this, I'll post some pics when I put it back in tomorrow. I think it turned out good! I'm keeping the sunroof liner black. Idk about the pillars yet, our the visors. Any suggestions?

    Leave a comment:


  • [experimental]
    replied
    ^check online retailers like Joann



    Here's my WRX, nothing special:





    ...need to do the visors still

    Leave a comment:


  • Vilius
    replied
    Well, it looks like everybody's ignoring me.
    So i repeat: where you guys get that "checked" material for your headliners? From ebay, local shop or somewhere else?
    Because I hadn't found any of these in Lithuania..

    Leave a comment:


  • Presns3
    replied
    like this one a lot

    Leave a comment:


  • goodduck
    replied
    these are great. the giraffe print is pretty funny.

    ive been wanting to do something similar to this on a volvo for a while:

    Leave a comment:


  • indytrucks
    replied
    I'll take some more pics when its all done and the interior is all in. I looks good with the seats in and the dash back together though so far, Not as flashy as it seems in these pics.

    Leave a comment:


  • MikeG
    replied
    I hope the giraffe loses

    Leave a comment:

Working...
X