Slammed Dinan S/C E46 M3 on a Dyno

[Emsan]

lol 214rwhp translates to like 240 to the crank bro. Or in other words, a stock E36 M3
And what is wrong with the E46? Stock E46 M3s dyno around 280rwhp.

Bro, on a DD no it doesn't translate to 240 at the crank. You would be using a 12% drive train loss.
This dyno is known to read low, but also accurate.

Most people I know who run DD's use this site to translate to crank hp http://www.to4r.com/calcs/enginecalc.php type in 214 and see what you get at the crank. It probably says 293.15

[KarlSpackler]

Bro, on a DD no it doesn't translate to 240 at the crank. You would be using a 12% drive train loss.
This dyno is known to read low, but also accurate.

Most people I know who run DD's use this site to translate to crank hp http://www.to4r.com/calcs/enginecalc.php type in 214 and see what you get at the crank. It probably says 293.15

Bwahahahahaha...... you must be a ricer at heart.

So your E36 M3 is rated stock at 240bhp right.

Intake +15hp
No cats +20hp
Gutted muffler +15hp

= 290bhp

Right, that makes sense. Maybe thats how you roll in Canada

FYI, most bone stock E36 M3s make 205-210rwhp BONE STOCK which equates to around 14-16% drivetrain loss which is pretty normal. You may have picked up a few hp from your mods but you DO NOT make 290+ bhp. Maybe 250

[junjdm]

that is hardly 'slammed.' looks great though!

I agree.....looks semi dropped....

[SeanDub]

Ok the car is not "slammed" Tough crowd. If he was any lower he'd be scraping everything. I don't think if you drove that car you would drive stupidly low.

You clearly don't know us very well.

Bwahahahahaha...... you must be a ricer at heart.

So your E36 M3 is rated stock at 240bhp right.

Intake +15hp
No cats +20hp
Gutted muffler +15hp

= 290bhp

Right, that makes sense. Maybe thats how you roll in Canada

FYI, most bone stock E36 M3s make 205-210rwhp BONE STOCK which equates to around 14-16% drivetrain loss which is pretty normal. You may have picked up a few hp from your mods but you DO NOT make 290+ bhp. Maybe 250

QFT.

[Emsan]

Bwahahahahaha...... you must be a ricer at heart.

So your E36 M3 is rated stock at 240bhp right.

Intake +15hp
No cats +20hp
Gutted muffler +15hp

= 290bhp

Right, that makes sense. Maybe thats how you roll in Canada

FYI, most bone stock E36 M3s make 205-210rwhp BONE STOCK which equates to around 14-16% drivetrain loss which is pretty normal. You may have picked up a few hp from your mods but you DO NOT make 290+ bhp. Maybe 250

Yes I'm a true ricer at heart who drives one of 45 of the Euro's that came to Canada meaning my car is 286bhp stock. So 293 at the crank is possible considering what I've done not to mention BMW always underrate their M cars in Europe.

So more like this:

Intake - Zero because I don't have one but you must have fabricated that in you're smart head of yours.
Muffler - 2hp
Dekat - 4hp
FDM - 1hp

So 286 + 7 = 293.

That is how we roll in Canada, ITB's and all. FYI I use that website to convert. It's there, it's calculated, haven't run across anyone who argues with it. It's better than guessing, 14% 15% 20%. It all depends on the dyno as well.

[Emsan]

You clearly don't know us very well.

Who's us

[SeanDub]

Who's us

Stanceworks, the place where you posted this thread. The place where most everyone rolls INCHES, as in multiple, lower than either car you posted.

[Stephen]

Did you know what stanceworks is or read anything on the home page?

[Emsan]

Did you know what stanceworks is or read anything on the home page?

I sure hope it's not about the strict use of car terminology, especially about something so subjective.

Stanceworks, the place where you posted this thread. The place where most everyone rolls INCHES, as in multiple, lower than either car you posted.

Most everyone, not everyone. The guy isn't part of stanceworks. I posted it cause the car is nice. I use a word slammed and you guys go all ape, think hard, worth it? probably not.

I've seen quite a few of the cars on here. Most of them are not even close to as low as this E46. Are you the official delegate for Stanceworks, you going to enforce the terms used?

I join forums with nice cars where people respect each others. Not go anal about whatever you think what car terminology is right.

Funny how you say QFT, cause you're far from the truth, but keep assuming everything, assumptions make you feel better.

[Stephen]

Dude. The e46 is nice, but you have to expect it here. Itd be a better OT type thing. But its not slammed

[SeanDub]

[Emsan]

I thought you made a thread to post pics of yourself somewhere else. No need to post another pic of yourself here. You look cute though, quite similar to your other pic you posted of yourself.

[Emsan]

Dude. The e46 is nice, but you have to expect it here. Itd be a better OT type thing. But its not slammed

Now I know.

[c-ron]

[Jatterbu]

Damn, that E46 is not slammed. Super weak numbers for the thing as well, most E46 M3's with a mild head/cams, tune and the usual will put down 330+whp. I'm proud that you had one of 40 some euro's imported to Canada, I had one of none imported on the US....bitch.