W202 C280 on 9.5 and 12 carlsson 3/6

[Khalil]

Sick!

[blink_me92]

W202 with 12" at rear? i thought it reach max at 11"..anyway very nice ride you got there ! where do you get your fender pulled and rolled?

nice car man but i dont think those are 12"s maybe 11"s

yeah at first I wanted to run 11's but when I calculated it over, I have 7.5 barrel + .5 face + 3.75 lips. So roughly its 11.75. I used those fender rollers thingy, but ended up having the car repainted on the fender cause paint was chipping...I went hard at it. Car is sitting lower than the pic above, the above pic is when I had the tires installed and had a "stopper" on the struts to prevent it from rubbing.....

to be honest it was a mistake....to much work for me to make the wheel fit.

I agree with INDOMI, you got balls to ride low in Indonesia! And yes im an indonesian too =D.

Holla!

Love it mate! As above, maybe slight more stretch on the rear and what ever else ot takes to get the rear sitting a tad lower over the wheels!

Yeah...got the fender pulled slightly....car is currently at my buddies place, I want to repolish the rear lips and get smaller tires, mostlikely I will go with 235/40/18

[blink_me92]

nah I finished uni years ago, just trying to make a living at the moment

well ma friend...you sure make a lot of money there judging by the car u drive...haha

[haikalenemy]

holaaaa...from fellow Indonesian..

finally, some actions..your wheel setup is sick..cant wait to see the end result on your benz...
and where did u get those lips?

[wagonist]

something is wrong with that math, 245's on 12's is not happening.... I think your calculating the overall width, not inner bead width, 245 on 10.75" makes more sense

nice car to!

[blink_me92]

something is wrong with that math, 245's on 12's is not happening.... I think your calculating the overall width, not inner bead width, 245 on 10.75" makes more sense

nice car to!

you mean the width of the rear wheels? the previous set up was a 10 with 2-2.25 inch lips. And then ordered 3.75 lips

Maybe I am wrong sir but I am quite sure that this is not 10.75....
help me calculate ?

Pics for clicks

http://www.facebook.com/photo.php?fbid=10100099275727696&set=a.659001568666.2253954.25519247&type=1&theater

[projektzwo]

hmmm... actually the rear cant be 12", from what i can see... are you sure about the measurements?

[blink_me92]

hmmm... actually the rear cant be 12", from what i can see... are you sure about the measurements?

Thank you sir....:it all makes more sense now...

[projektzwo]

and... what's the size now? :P

[AndreNY]

well like i said earlier there is not way that's a 12" wheel, and i do not mean to sound like an A$$, on my old 500E pictured in my sig the wheel was 18x11" with a 255/35 and it streched like a motherf*kr, and i went thorugh a nightmare to squeeze it under my quater panels, the 500E has much lager quaters then any W202, fitting a 12" wheel on any W202 would require some serious serious fender work.

[Mr Ganja]

well like i said earlier there is not way that's a 12" wheel, and i do not mean to sound like an A$$, on my old 500E pictured in my sig the wheel was 18x11" with a 255/35 and it streched like a motherf*kr, and i went thorugh a nightmare to squeeze it under my quater panels, the 500E has much lager quaters then any W202, fitting a 12" wheel on any W202 would require some serious serious fender work.

Your 500E is saved in my iPhoto. Thank you kind sir

[lowlydubb3r]

Hey dude, I doubt you remember me but we met in MD. I loved your jetta and the MB looks like its going to be wild.

[blink_me92]

well like i said earlier there is not way that's a 12" wheel, and i do not mean to sound like an A$$, on my old 500E pictured in my sig the wheel was 18x11" with a 255/35 and it streched like a motherf*kr, and i went thorugh a nightmare to squeeze it under my quater panels, the 500E has much lager quaters then any W202, fitting a 12" wheel on any W202 would require some serious serious fender work.

Yes sir, I appreciate the input....I measure the inner wheel just recently since I am getting a slightly smaller tires..and yes it measure to 11-.11.25 inch.

the car has a slight pull fender and major work has been done inside the fender to get the wheels on....car should be done next week, since the lips are getting polish...

much appreciated for the input

Hey dude, I doubt you remember me but we met in MD. I loved your jetta and the MB looks like its going to be wild.

I am not sure if I can recall....where about in MD did we met?

[Neoki]

nice set of wheels sob

3.5" lips isnt it

being stanced in indonesia?? you got balls my man, with potholes the size of a moon i cant imagine driving around with stretched tires there haha but hell yeah im loving your wheel setup, looks crazy!

being stanced in indonesia? y not!! as long its a weekend car.. not for daily lol

btw.. hows the BBS RC doin mate

[Jedidiah]

Please post better pics when you can!