W202 C280 on 9.5 and 12 carlsson 3/6

[blink_me92]

Excuse my pre mature measurement . The wheels turned out to be 11 in the rears, the wheels are long gone btw.

Currently running on something else, might be post of the current set up soon
:

[Petterii_]

forgot about offsets?

ET 8. better offset would be ~20

[projektzwo]

forgot about offsets?

[Petterii_]

12 on a w202 ? is that even possible without fender work ? if it is a 12 this is crazy !

thats not possible. here is 11" 245/35 and rolled fenders

[SD202]

12 on a w202 ? is that even possible without fender work ? if it is a 12 this is crazy !

[ll1l2l1l2lll]

WHOA. I've never seen your car. Great work my friend. My favorite wheels on the w202 besides 3pc AMG's and Brabus III's. I LOVE THOSE WHEELS. never could find them.

[getz]

being stanced in indonesia? y not!! as long its a weekend car.. not for daily lol

btw.. hows the BBS RC doin mate

daily driven in indonesia?! why not?!

[blink_me92]

Please post better pics when you can!

I will take better pics soon.

been busy lately...wheels was getting repolished and wheels have not yet been on the car yet...its been sitting my garage for quite sometimes. Should be posting new pics

ps: the rear wheels was measured to 11.5

[Jedidiah]

Please post better pics when you can!

[Neoki]

nice set of wheels sob

3.5" lips isnt it

being stanced in indonesia?? you got balls my man, with potholes the size of a moon i cant imagine driving around with stretched tires there haha but hell yeah im loving your wheel setup, looks crazy!

being stanced in indonesia? y not!! as long its a weekend car.. not for daily lol

btw.. hows the BBS RC doin mate

[blink_me92]

well like i said earlier there is not way that's a 12" wheel, and i do not mean to sound like an A$$, on my old 500E pictured in my sig the wheel was 18x11" with a 255/35 and it streched like a motherf*kr, and i went thorugh a nightmare to squeeze it under my quater panels, the 500E has much lager quaters then any W202, fitting a 12" wheel on any W202 would require some serious serious fender work.

Yes sir, I appreciate the input....I measure the inner wheel just recently since I am getting a slightly smaller tires..and yes it measure to 11-.11.25 inch.

the car has a slight pull fender and major work has been done inside the fender to get the wheels on....car should be done next week, since the lips are getting polish...

much appreciated for the input

Hey dude, I doubt you remember me but we met in MD. I loved your jetta and the MB looks like its going to be wild.

I am not sure if I can recall....where about in MD did we met?

[lowlydubb3r]

Hey dude, I doubt you remember me but we met in MD. I loved your jetta and the MB looks like its going to be wild.

[Mr Ganja]

well like i said earlier there is not way that's a 12" wheel, and i do not mean to sound like an A$$, on my old 500E pictured in my sig the wheel was 18x11" with a 255/35 and it streched like a motherf*kr, and i went thorugh a nightmare to squeeze it under my quater panels, the 500E has much lager quaters then any W202, fitting a 12" wheel on any W202 would require some serious serious fender work.

Your 500E is saved in my iPhoto. Thank you kind sir

[AndreNY]

well like i said earlier there is not way that's a 12" wheel, and i do not mean to sound like an A$$, on my old 500E pictured in my sig the wheel was 18x11" with a 255/35 and it streched like a motherf*kr, and i went thorugh a nightmare to squeeze it under my quater panels, the 500E has much lager quaters then any W202, fitting a 12" wheel on any W202 would require some serious serious fender work.

[projektzwo]

and... what's the size now? :P