Not so stanced Lincoln

[poker!!]

shits way hot! this is where it all started!

[benz88]

Basicly this is my weekend car, Got it after i got rid of my Z.
Well i figured its time to post a mini build of my car so far.
Here's how i rolled since Spring 09, 08 it was the same just Without the Gold grill



Got my buddy Dekay to stripe the car
black and burgandy to match the interior




Now onto the hydraulics, Picked them up During BMH's Fall sale last year,
The setup Consists of a Black Magic 3 pump Kit, with abunch of upgrades.
Now onto the pics

All wrapped in pieces while bringing to a friends for assembly


Now onto the build
Car rolled into Pedro fabs Garage(lowrider 4 life) put on jackstands and 4hrs later front was done

Jonny(Qwerty) on here grinding and grinding away at the 4.5tons to make them fit the cups, Also cutting them down

front done

next was to do the rear


And on the ground



Next was time to build the rack, Pedro hard at work welding the racks

then hard at work pissing on the factory airbags he hates so much


At this point the racks are in and we just had to make the cross bars for the noids and the pumps.
Jonny left and PedroFab to the right

Jonny welding the bar in place

and pump rack mosty done and painted.keep in mind i didnt spray much on areas that wont be seen. Simple 2 banks of 4 batts, and a rack for 3 pumps


So the cars 99% done At this point. Just waiting on new tanks from BMH now



i'll be running 36 to the rears and just 48 to the front for break in time.
And the car done




finished setup



3wheelin at a local show.




i need to do rear link bars and also get longer brake lines for the rear. NEw frame too lol





Yes im not stanced yet, Im close though, Once my custom control arms are done and my new frame the wheels should be flush with the fenders more. And yes im low as hell in the front, My cross member usually sits 1" off the ground while cruising, frame about 2" Im constantly gouging 3 lines out of the road when i hit little dips.