Basic White Bitch Jetta

[PassionGarage]

So if you wanna know what happened to my old car head over to the other thread http://www.stanceworks.com/forums/sh...ghlight=VDUBBN

Lets start off with the new car then

After my other Bora/Jetta got wrecked in an accident i went on the search for the new Bora/Jetta and found this beauty laying around in a Melbourne Car Used Dealership

Got a mate to look at the car before i made the commitment
did all the mechanical checks by State Roads to see if it was legit, and it all came back perfect

So i flew down on the Friday 2 days before valentines day to pick her up !!




When i got there i sorted my insurance and Started the 1000km's drive home back to Sydney on the Saturday
So i took some photos on my drive home !!

This is VDUBBN 2.0 or Bonnie the basic white bitch Jetta/Bora
24v VR6 AUE, 6Speed 4Motion










Yes my Ugly Head - Also brought home some barrels and lips with tires for my Mate Raymond chan who has a rare mk3 golf variant on BBS Strosek's as we don't get them here in Aus his was imported from Japan.





My Inner bogan - Bred Edwards Instead of Brad lol ( for those who don't know what a bogan is its Australia's Redneck just with less guns more mullets and more drinking )














Collected a lot of bugs after driving 600km's hahaha




A beautiful victorian Sunset ( Sorry for the low quality of photos, only had my Phone on me at the time which has a broken lens )



so i drove the 1000km's and made it home safely !!! and back in time for the GF for valentines day !!


so lets fast forward to more recent days

So if you had a look at my last thread you'll see that I'm currently VERY SLOWLY rebuilding a set of Rays VolkRacing 3piece CV Pros
Specs are as is
16' faces - Step lips to make them 17's
8.5' barrels
5x100
gold and platinum Hardware bolts
and stupid offset which i haven't been bothered to check



They don't currently clear my brakes, so getting new barrels from Whitehorse industries from Melbourne and need some spacers/Adapters


Teaching my 4 year old and 2 year old Cousins about Real wheels so when they grow up to own hectic cars they know where shit stands !!!





my mates and i got to work on fitting a Pod Filter for cleaner air intake and well it just looks a lot nicer than the stock airbox, so we mounted it up so it would sit inside the original box so i wouldn't get done by the police ( strict car laws in NSW Australia )

We took this at EOMM ( End of Month Meet ) At the Famous Eastern Creek Motorsport Park, Hosted by Carsforhope.com.au for #THEORANGEEFFECT to help spread awareness of Self Harm and depression and suicide !!

Was rocking a #iamdriven Card from Carsforhope and my defyallodds lanyard
with my custom painted white and home hydro dipped engine cover as well cos i can lol updates the look really






Ignore the hanging Exhaust, on the way to EOMM it fell off the rear hanger and i was unaware until i got home that night

Reppin Defyallodds as i am the Australian Distributor and carsforhope sticker as well

also have my Stanceworks Plate cover !!




My mate and i in the background (I'm on the right, my mate shane on the left)




So this was last week Thursday So lets fast Forward to Today, my coilovers from BC (static is everything)
Coilovers are currently on their way and should be here either this afternoon or tomorrow ( HOPEFULLY )

and yesterday to celebrate the first day of Autumn here in Australia i gave her a good wash
She still needs a good cut and polish so i guess its time to learn a new skill and get down to it !!!



\





So i guess thats really it for now, until my coils are here thats all I've got

also currently painting another 4mo lip to paint match with the white atm taking up my time til the coils get here

Any more questions for my build, ask away !!!


A bit about me

Im in my Last year of School
Have owned 3 volkswagens, 1978 Mk1 golf GLS - MK4 2003 tornado red VR6 Bora/Jetta, and now my white VR6 Jetta/bora - Have worked on many other volkswagens such as 1 of 4 mk1 caddy's in Australia owned by one of my best mates, and MK3's and MK5's as well, and i also own a 2001 GLX Landcruiser !!

I will be join the NSW FireFighting Service After School
and will also be A mechanic but for the future open my Garage !!



Til next time guys, Happy Scraping

All we need is LOVE & PEACE

[PassionGarage]

Video of Exhaust

Just a quick Sneak Peak of my Exhaust
its in the garage so sounds a tad different

Gotta love the sound of a 24v VR6

[PassionGarage]

Little Update

Quick Update, coilovers are in Transit and if they aren't at my house by Friday Arvo they'll be here monday and then the fun begins

Also debadged the Boot/Trunk ( Sorry for shitty photos, didn't get home from a Mates and Cars night til late and only had my phone on me, will take some nicer photos this weekend at The Downshift Sydney Meet at Fairfield ShowGrounds )





Also my mate had this Steering column Boost Gauge from his mk5 Gti in his boot and we test fitted it lol looked awesome makes me wanna R32 Turbo the Bora now haha




Also found a ciggy in my mates garage and i had been playing Trance before we went off for dinner






Til Next time
Happy Scraping

All we need is LOVE & PEACE

[WelshVW]

as much as I love the wheels, 17s are too small for the mk4 chassis imo

[PassionGarage]

as much as I love the wheels, 17s are too small for the mk4 chassis imo

Ive figured that 18's are just a tad too big for the look I'm going for and theres a lot of mk4's on 17's

[Dj-barma]

do your wheels even fit m9? <3

[PassionGarage]

do your wheels even fit m9? <3

nah bruh, they don't ayyyy

[PassionGarage]

Quick UPDATE

Soooooooooooooooo

Coils by brad edwards, on Flickr

I am very happy as these beauty's arrived
Will be installing on Wednesday night, as i didn't get the chance over the weekend as the beautiful missus took me away for a water ski and on the boat up the coast of NSW

IMG_3376 by brad edwards, on Flickr

So some info on the coils

Bc Racing Coilovers
Type BR for a good street ride
Have the ability to soften and harden the dampening
and the coils are fully adjustable and interchangeable

Will be getting IDF plates For the rear so the axle doesn't sit too far forward

So til Next time
Happy Scraping

All we need is LOVE & PEACE

[PassionGarage]

Little update, coils are going in tonight will upload photos tomorrow
plan is to max the coils out

til next time
Happy Scraping

All we need is PEACE & LOVE

[MadScientist]

in for more. im in vic, and i have a black on black v6 4mo bora, and im doing similar.....

[nishy]

little update, coils are going in tonight will upload photos tomorrow
plan is to max the coils out

til next time
happy scraping

all we need is peace & love

hey its past tomorrow where is the low low???? :d

[190Evan]

This thread has confused me. 1/3 VW with a wheel whores sticker on stock wheels, 1/3 "JUST DO IT' font inspirational quote banner, and 1/3 water skiing or whatever you guys call it in didgeridoo land. Slam this thing and get those wheels you test fitted on. Did that Jetta come with the engine bay like that or are those cover panels custom? I love the way the bay looks.

[PassionGarage]

Soooooooooooooooooooooo
got around to lowering the car on Wednesday night


so to sorta give a quick comparison, still waiting for my Nikon SLR to come home from the states so i can take some good photos but til then phone photos sorry

Before

2016-02-13 15.35.48 by brad edwards, on Flickr

After

12842376_1287117601315132_1087127194_o by brad edwards, on Flickr

12823171_1287117557981803_49572277_o by brad edwards, on Flickr

Pop a leg up on it m8

12810033_1287117521315140_1490027742_o by brad edwards, on Flickr



Car still needs to be lower, as i need r32 lower control arms, Drop links for the sway bar, and a few other things will help make it a bit lower and ride a bit better, along with all new bushings and all.
but the look I'm going for this hight will work and with my side skirts front lower lip and rear valance it'll look a bit lower as well
The car also has -10mm Strut top bushings from Powerflex UK

the dampening is as stiff as it can be, but still gives an awesome ride and not overly bouncy at all, but the way the car drives is so much better !!


Wheels should be acid dipped to get all the old paint and all that crap off it !!
then will go off for paint

[PassionGarage]

in for more. im in vic, and i have a black on black v6 4mo bora, and im doing similar.....

cheers mate!!

hey its past tomorrow where is the low low???? :d

haha sorry have had a bad week/weekend
all is up now, more photos to come need to clean my car

This thread has confused me. 1/3 VW with a wheel whores sticker on stock wheels, 1/3 "JUST DO IT' font inspirational quote banner, and 1/3 water skiing or whatever you guys call it in didgeridoo land. Slam this thing and get those wheels you test fitted on. Did that Jetta come with the engine bay like that or are those cover panels custom? I love the way the bay looks.

lol sorry mate will keep the thread more car related!,
to reply to the stickers,
wheel whores - i have more sets of wheels laying around they're all for different cars and different builds,
the Defyallodds sticker on the rear is because I'm apart of Defyallodds and its how i can make some extra dosh on the side of working,
the majority of the stickers are coming off when i finish my wheels matey boy

The bay as well man
Its a vr6 4motion Bora, that covers didn't come like that no, i have cleaned up the bay a lot and have done a custom paint on the cover to make it different from the rest and just really cleaned it and a lot of the wiring was tangled and i just unplugged it all and untangled all of it and put it all back. also the Pod filter/air filter is just a universal one, just to update the look of the car and to give it a bit more flow

[PassionGarage]

So the day after i put the coils in, the sump was gone,(a very very slow leak maybe would take 8weeks to empty the whole pan, before i drive it i check the oil and then i fill it up, it leaks so slowly so nothing to stress about )

yes i know how to drive a lowered car, but this is a volkswagen problem making shitty alloy sumps, so now am fitting up a 12v VR6 sump from a mates old mk3 thats been laying around it hold 3/4 less oil but oh well, its made from steel and will have a bash plate welded on as well!!

Will take some more photos and update some more photos of when we lowered the car but for now the photos above will do for you if you guys and girls wish.


Til Next time
Happy Scraping