Unconventional

[mo diesil]

go lower, i like these body style. meat ball stance. ohh yea 2jz swap wouldn't hurt

[OSSHWA]

Never really seen one of these fixed up. Very cool build.

[seventhskyline]

Do they sell Performance Superlite wheels in the states? They're cheap, strong, easily replaceable (well, they are here), and come in some bitchin' 15/16x8/10" single digit positive/low negative offsets....



Might be resold by Superlite Wheels over there?

[stanced_supra]

Sound like E30's. Because of the camber when you lower it, you are gonna need spacers for the back, if you run a square setup.
But if you run a staggered; like 17x9 / 17x10 you are best of running the same offset all around. Seems its the same with your car, not because its build "weird".

And 17x9 / 17x10 would look sick with some 215/35 & 225/35.

It is built weird, exactly like the e30 but more extreme. I installed a weld in rear camber kit to displace the point of attachment of the lower control arm, moving the outside down on an adjustable bracket to correct the camber.

Keep those wheels, get smaller tires, and go lower. IMO it'll be perfect after that.

Cant man, the brakes I have dont even fit in the diamter of the 14" wheel and barly fit in the diamter of the 16"





those are some 16" wheels I had sitting around, just checking for clearence






The car IS going lower, but the supplier I bought the rest of the parts I need messed up and its 10 weeks I'm waiting for my parts now

thanks for the comments guys updates hopefully for the near future if I get my parts

[stanced_supra]

I'm also scared that if I take a 0 offset in the front, and the caliper doesnt clear and I have to space it, its going to throw the front wheels out and I'm going to end up with bad looking poke...

at least the +15 I have space to play and I can add the required spacer to make it sit flush. Good thinking?

[seventhskyline]

You'd need big width and negative offsets to poke anything on a flared MA61, don't be weak!