The Prom Queens build

[promking]

First tire mounted <3 This is the 175/50s on the 7s

[promking]

Didn't really get a chance to do much this weekend. Was working on the Volvo, and playing with my two year old.



I did drive it yesterday. I put on my Momo wheel I had laying around, and my momo knob.

Looking for time this weekend to install the coils and wheels finally.

Oh and everybody likes pictures



and the new motorcycle

[hinrichs]

Love this, cant wait to see those wheels on.

[promking]

I didn't put the wheels on it yet. I suck I just haven't had time







I did put this WHEEL on it, and give it a knob job. I just happened to have these laying around.

[P78]

goddamit

we want to see other type of wheels mounted

[promking]

I love this color in the sun.

Finally put the coils, wheels and axles in.

Congratulations to me, now I can't drive this car because it's to low.

And yes... I have lots of projects in play.

[hinrichs]

wheels look great on there

[mgpdoc]

So good.

[storey618]

this is pretty awesome!

[promking]

So I'm working on the car when I have time.
I haven't had much time to do the " stance dance " with the car.

However, the 13x8et0 fitment is kind of very aggressive.
I'm not sure how I'm going to go about getting my fitment a little better. It's okay, but I want them in a little closer. I have a few options I can do... I might try to camber the rear with some plastic shims just to get the wheels to tuck a little better. If after -1.5 degrees it doesn't come to my liking..
I'm going to either narrow the rear beam, or take some material off the back of the wheel. There's a little room to work with there.

As for tonight, I'm going to trim the flares slightly on the inside edges, and roll the lips of the front and rear quarters.
Last night was 85 degrees felt like 95 with humidity so I passed on working on her last night.

[Dutch]

Please stop being so awesome... You make me feel bad for not being this awesome... :'(

I guess it looks ok.... Who am I kidding? It looks amazing! The car(s), the bikes... Aw man... I wish I was this awesome.

[kittenpuncher]

I like the fitment on the cabby

[promking]

Well I like the fitment.
But I don't like the zero driveability lol



Looks like I'm going to have to come up at least an inch or so.

[Dutch]

Looks like I'm going to have to come up at least an inch or so.

Blasphemy! This is awesome!

[promking]

Found an acceptable ride height, took her for a test ride. Didn't smash the pan or bottom out everywhere I went so that's a good sign.
Not sure if I really dig the wheels on the car anymore.
Cleaned the car yesterday though

Exhaust def has a leak now from where I smashed it test driving the other day.
Also the speedo isn't working from when I pulled the cable to fill it with new fluid.
Always more to fix.