So, this is my 1998 Saturn Sw2. Like the title says, this will be a slow build..as well as a junkyard/budget build. I'm not very experienced with working on cars so this will be a learning experience.
I apologize if my thread is kinda messy. All comments good and bad are more then welcome. Have any ideas, tips, or questions? Please don't hesitate to ask/share 
Future Plans:
Remove Pin Stripes
Replace tint from previous owner. A lot of bubbles on the driver side window (will post pics later)
Repair front passenger door panel and inside door handle
Install new speakers
Wire tuck
Drop it a few inches
New wheels
New muffler
Seat swap
Maybe.. just maybe HIDS.
Possibly headlight tint, but unsure on how it will look.
{Keep in mind I am not a photographer, and I'm using my cellphone
}

The first thing to do was to remove the horrible pin stripes on the car. Luckily my friend showed up at the perfect moment and we knocked it out pretty fast using a hair dryer.
Before:


Pinstripes removed, and a quick wash.


Back speakers blew out so I ran to the thrift shop, found some cheap speakers and wired them in for a temporary fix.

Also, these are going in the front. I have one installed so far

Was planning to do some wire tucking and cleaning, but didn't happen that night. So instead, I took a picture.

The next day I did a little cleaning, mostly up in the front right corner while I had the time. Although, I'm still not very happy with it but time was limited.


I know, still pretty messy.

I'm hoping to get more work done this coming week on one of my days off, along with some better pictures.


Future Plans:
Replace tint from previous owner. A lot of bubbles on the driver side window (will post pics later)
Repair front passenger door panel and inside door handle
Install new speakers
Wire tuck
Drop it a few inches
New wheels
New muffler
Seat swap
Maybe.. just maybe HIDS.
Possibly headlight tint, but unsure on how it will look.
{Keep in mind I am not a photographer, and I'm using my cellphone


The first thing to do was to remove the horrible pin stripes on the car. Luckily my friend showed up at the perfect moment and we knocked it out pretty fast using a hair dryer.
Before:


Pinstripes removed, and a quick wash.


Back speakers blew out so I ran to the thrift shop, found some cheap speakers and wired them in for a temporary fix.

Also, these are going in the front. I have one installed so far


Was planning to do some wire tucking and cleaning, but didn't happen that night. So instead, I took a picture.

The next day I did a little cleaning, mostly up in the front right corner while I had the time. Although, I'm still not very happy with it but time was limited.


I know, still pretty messy.

I'm hoping to get more work done this coming week on one of my days off, along with some better pictures.
Comment