To the ground alice!

[SnazzyQ]

i just read this whole thread.made me miss having a honda. they were always so fun. looks good but i think you need wider wheels for those flares.

He just needs a little less camber really. OR OR You could lower the car to tuck them. That would be super tits

[Grimoire Greens]

He just needs a little less camber really. OR OR You could lower the car to tuck them. That would be super tits

I plan on tucking the wheels, its just a work in progress. these wheels are extremely wide so its not all that easy

[Grimoire Greens]

Updates

Hey guys, its been a while. ive been working, cutting things, and trying to go lower but i keep getting distracted.

Last time i updated this post i installed my drop forks. Yes they are in and yes they dropped the car a nice two inches lower in the front

Comparison between the MPC and Stock Forks



In





Cars front went lower and then i couldn't turn because there was rubbing.

Not from the flairs but from the frame in the wheel wheels. dont have pics but i just cut them/notched them for more turning radius. boom

cars pretty low/sexy but i need more lows



On my list of parts to buy in the future are power 326 springs for the rear. probably gonna go with 20k springs to eliminate all shock travel.

I do still have to install my extended tops hats, jdm rear speakers, and still wanna lower it all around another 2 inches.

ive just been side tracked because i bought an ef hatch stock and stanced after owning it a week. It has its own build thread on here



Got less then $1000 into it so i cant complain and its a fun little beater

Also have been buying parts/wheels like always

picked up a set of staggered miro stpg1 16x7.5 16x9.5 for $250. one wheel had a huge bend and the previous owner blew a tire because he was driving on them.



took a hammer and a torch, fixed the rim below



wheels sell for $1200 on vortex because they are discontinued so thats a good steal.

Same guy sold me these brand new emusa one piece coilovers for Da, ef, crx & universal ebay coil set for $150. that alone is another steal so from a single honda owner in my area my collection has grown quite a bit for basically no monies.



havent decided if im gonna slap them on my ef or if this is a sign to buy another crx since suspension and wheels are covered.

but yes ill get back once i get the ball rolling and slap news parts on my eg hatch! thanks for reading

[19birel]

Those fender flares really cleaned up the car, personally I would probably paint the rear valence matte black as the plastic looks a bit faded. Any plans to rewrap the hood? If you get someone to help you it will make it a lot easier.

[storey618]

x2 on painting rear valence also would love to see it roll without the basket. the baskets cut off in one of your pictures and it just looks so much better imo

[Loaf31]

I love everything about this build thread!! Keep it up, mark!

[Grimoire Greens]

omg an update....

hey guys, its mark again who else. its been quite awhile since an update and i have to admit ive been having way too much fun messing with my shitbox ef and hoarding car parts for future builds

the hoarding just includes buying more wheels, 2 sets of coilovers, springs, and what not for future hondas to ruin.

but i did make major progress towards the eg hatch.

the thing i was waiting on was parts but that changed bc

boom



I finally received my swift springs ive been wishing for and promising to purchase for months now.

i decided on going with 6 inch springs 22k for the rears and 18k for the front. ya know to complete eliminate shock travel while giving me the fantastic ability to go closer to the ground

this next pic is before i slapped that new suspension stuff on but i needed to make a point.

1. hey i got a new lip since its the one all the cool kids have... and i gotta fit in
2. omg no way, this guy bought those jdm bumper moldings from japan for $300. what a tool^

oh do you spot the difference in the next pic?



the tool finally removed the roof rack for the much needed cleaner look!

i must admit many many people on this form wanted it gone.. so i decided to take it off for shits and giggles and it actually makes this car far more cleaner

but anyways

old suspension


+new parts (extended top hats and springs)



equals car porn



just to show you the difference between a 9.5 inch spring and a 6 inch (Rears)



and a 8.5 inch spring and a 6 (front)



old front suspension


now this is so beautiful, its like sending your daughter to the prom in a bomb ass dress... except i dont have to worry about her fucking dudes and being a little slut buwahaha



i basically adjusted everything to where the whole car would be lowered by an inch and a half all around.

just to start with and make sure it still driveable



just a before and after


heres the clearance of the oil pan. about 1.75 inches from the ground or 2 fingers worth



might have to take off the tie bar in the future to go lower in the back sigh



i **** taking pics out front of my house because the road is in a horrible slant but gotta show you hows its sitting currently









yes i also got that new wing/spoiler but only because instagram told me to do it sadly...

i also kinda like it

but for the future i now must work on
1. installing my street sign skid plate to protect my precious oil pan
2. tuck my exhaust because it drags on the ground already
3. maybe consider getting someone to raise my engine

like these guys did it





if only i actually had car friends in my area lol

4. go lower obviously

thats all i got for now guys.

i also thank everyone who actually reads my builds. i know the beginning of this build is all over the place and people call me rachet but hey why not. a few people have actually found me on instagram and ask me questions and for advice. its cool being able to talk about cars with people since i have no car friends.

and i didnt forget... im going to paint that rear faded lip its on my list of things to do currently

5. paint rear lip lol

[Matt]

its like every horrible honda scene thing rolled into one car....

[royalife]

its like every horrible honda scene thing rolled into one car....

this.

[storey618]

it looks so much better bro!!!

[spaaals]

Just read through all of this and cant say i **** a single thing you have done. Keep this up

[Tate]

Honestly this build is hilarious. and awesome.

[jalenda9]

Cars rad imo. If it's not some Euro car it's not shit on this forum so there's nothing better then a hi, fuck you every once in a while. I love it man

[SHOGUNOVDDRK]

TO THE GROUND ALICE!



Please moar pictures!

EG is cool but I want to see more of the ED..
I continue to love seeing your thread pop up.
I'm loving the bumper molds but gaht dayum at the price tag.

[los02]

I should have kept those 205/40/16's.