1993 190e stance build

[190Evan]

So I took apart the idiotic 190e front suspension

Another pic


these were due to be changed anyways

I then got an idea of where I have to shim them and where the hole line up



started on the cutting and shimming



ghetto as fuck lol, I will be redesigning these on the computer and cinching them with a stronger less soft metal.

m\Mmmm

bolted the fuck in finally

WOW so pretty

Lol this is maxed negative, Ill be looking into extending my Flca's as long as it doesn't fuck with my steering geometry too much.

More to come. hopefully the camber will be more noticeable with the e36 coils on and the new wheels as well.

[190Evan]

Wet sand that shit off.

This is maybe a dumb question, but being that you can get Diamond steelies for about $0.50 these days, why bother with all the sketchiness of thick-ass adapters + slip-on spacers?

Because I found these locally and Im looking for a challenge haha. Im going for that wide streetshark look and personally don't want to go any wider with a wheel because it will hit the shock body. And a lower offset that et-38 would be exposing the brakes and I don't want to look like a dingus with my little 190 brakes dangling out. The tails are plastic and I feel like wet sanding might scratch them, also I doubt i could get into the little crevasses of 190 taillights with my fingers. the spacers are hub centric and the adapters are 1.25 inch if that makes a difference haha.

[loekaaz]

^^This

[Oh Damn, it's Sam]

one of the players at vatozone accidently sold me paint instead of tint and I was too much of a dumb ass to not test it and that was the fucked up result haha, perfect euro tails destroyed

Wet sand that shit off.

This is maybe a dumb question, but being that you can get Diamond steelies for about $0.50 these days, why bother with all the sketchiness of thick-ass adapters + slip-on spacers?

[190Evan]

Looking good dude. That front test fit though .. Lol.

Just curious, how'd you get your tails looking so red?

one of the players at vatozone accidently sold me paint instead of tint and I was too much of a dumb ass to not test it and that was the fucked up result haha, perfect euro tails destroyed

[_shim]

Looking good dude. That front test fit though .. Lol.

Just curious, how'd you get your tails looking so red?

[190Evan]

saw this picture:
Was like
Big risk, but if you do make this work... well, it will be epic. Excited to see this unfold!

in the front im planning on running maxxed out negative on my plates and possibly going with some extended FLCA's but worse comes to worst i will run flares. really trying to not run flares though. this photo was also taken with the wheel not under load so it wont be as drastic

[gearheaded]

saw this picture:

Was like
Big risk, but if you do make this work... well, it will be epic. Excited to see this unfold!

[190Evan]

Pretty sick build!

- Renato

haha lots more to come

[TWM Performance]

Pretty sick build!

- Renato

[190Evan]

alright guys so i got the black 15x10 and 15x11.5 et38's mounted properly with the stupidly large 5x139.7 adapters and of course because my brakes are tiny they rubbed the brakes so I had to run 10mm spacers on top in order for them to clear and this is what im looking at....lol ill find a way to make it work, hopefully.

from the side im kinda digging it http://www.stanceworks.com/forums/im...ons/icon10.gif

and I also got a new lip but im waiting to mount it until I get the e36 coils bolted up

[190Evan]

Dat hot air intake tho...

haha! I know i got rid of it and polisged and painted the original tin intake and put it back on. Every 17 year olds gotta fuck up

[190Evan]

Got some of these and I need to figure out how to drill and shim these to fit the front.

[loekaaz]

Dat hot air intake tho...

[190Evan]

Use the IMG tags and get direct link to the picture (right click > copy image url)

thanks man!