Announcement

Collapse
No announcement yet.

Just another E46 Coupe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • najim
    replied
    Then I took about a million more pictures..
    *

    ]










    *
    Next on the to do list is -*
    Clutch (Possibly flywheel)
    Timing Chain Tensioner*
    Discs and Pads all round + Brake fluid change and lines
    Swap rear tires over from the MV1's (225.35's as I currently have 225/40's on the rear of the Keskins)
    *
    Dependent on how it is mechanically then cosmetically -*
    Raise the front, fit 25mm spacers at the front.
    Measure up and sort for some sort of spacers at the back to have it equal to the front
    Facelift rear boot lights
    Respray front Kidney Grilles properly - or source a chrome set and leave them chrome
    *
    Drive and enjoy!

    Leave a comment:


  • najim
    replied
    Hey guys! Some updates after winter

    Getting in the air..

    One side done..


    *
    Then I tried on the 25mm spacers at the front as opposed to 15mm..
    *
    25mm -*


    *
    15mm -*

    *
    I like the 25mm spacers but at the current height it's too far out and I can't turn lol and it started raining so I thought I'll stick to 15mm's and raise it another time!
    *
    Then gave it an obligatory wash!






    *

    Leave a comment:


  • najim
    replied
    Originally posted by lamsv View Post
    E46's have a small amount of camber adjustment front and back. If you remove the factory alignment pin from the strut bearing/mount, the stud holes in the strut tower are slotted so you can move the strut assembly inwards to get some negative camber. Out back the outer, lower control arm bolt is eccentric, and allows a little bit of negative camber as well.

    Great looking car! Looks much better with the spacers!
    That's what I thought, I'll be getting the car in the air on Saturday so will have a look then. Thanks man!

    Originally posted by DeMaroE46 View Post
    Does yours have it? I haven't looked at the rear, but I know the front has nothing.
    I'll update on Saturday with pictures

    Leave a comment:


  • DeMaroE46
    replied
    Originally posted by najim View Post
    Really? I thought all E46's have some adjustment at the rear!
    Does yours have it? I haven't looked at the rear, but I know the front has nothing.

    Leave a comment:


  • lamsv
    replied
    E46's have a small amount of camber adjustment front and back. If you remove the factory alignment pin from the strut bearing/mount, the stud holes in the strut tower are slotted so you can move the strut assembly inwards to get some negative camber. Out back the outer, lower control arm bolt is eccentric, and allows a little bit of negative camber as well.

    Great looking car! Looks much better with the spacers!

    Leave a comment:


  • najim
    replied
    Originally posted by DeMaroE46 View Post
    That'll be awesome! I need camber arms and camber plates, because no factory adjustment
    Really? I thought all E46's have some adjustment at the rear!

    Leave a comment:


  • DeMaroE46
    replied
    Originally posted by najim View Post
    Thanks man! My front helpers are still in for now, rear adjusters are out. But the bumpstops haven't been cut down!

    Intention for the new year is to remove front helpers, cut down rear bump stops and more neg camber at the back!
    That'll be awesome! I need camber arms and camber plates, because no factory adjustment

    Leave a comment:


  • najim
    replied
    Originally posted by DeMaroE46 View Post
    Your car looks great man! I have JOM's as well, I don't have the helpers in, and I still have the rear adjusters. Once I roll my fenders I plan on taking the adjusters out completely.
    Thanks man! My front helpers are still in for now, rear adjusters are out. But the bumpstops haven't been cut down!

    Intention for the new year is to remove front helpers, cut down rear bump stops and more neg camber at the back!

    Leave a comment:


  • DeMaroE46
    replied
    Your car looks great man! I have JOM's as well, I don't have the helpers in, and I still have the rear adjusters. Once I roll my fenders I plan on taking the adjusters out completely.

    Leave a comment:


  • najim
    replied
    Car has stayed pretty much like this...

    Except, I got a set of Morimoto Bi-Xenon Projectors + 6K 35W HID's - I intend to change the bulbs to 5K and blacked out the reflectors. Plans are to run quad xenons soon

    Other than that, been driving it and enjoying it! Going to go into winter mode in a few weeks but got some plans for the new year!









    Didn't get a picture with the shrouds in.. Got too excited haha!!
















    Enjoy!

    Leave a comment:


  • Chasen88
    replied
    Nice start, can't wait to see what else you have in store for us.

    Leave a comment:


  • najim
    replied
    Originally posted by Spirit View Post
    Really nice car
    Thanks mate. Got lots more plans! Just a matter of time and funds lol.
    Rear should be lower tomorrow.

    Leave a comment:


  • Spirit
    replied
    Really nice car

    Leave a comment:


  • najim
    replied
    Originally posted by dylan. View Post
    Looks a lot like mine. good to see another orient blue
    Thanks!

    Leave a comment:


  • dylan.
    replied
    Looks a lot like mine. good to see another orient blue

    Leave a comment:

Working...
X