Email TunerShop and see if they can't build you some custom lips and barrels. They're not the cheapest dudes out there, but they got me the custom built 4/5" outer lips for the Equips in 4 weeks. From Germany.
Announcement
Collapse
No announcement yet.
Project SmurfShark - BMW e24 Build
Collapse
X
-
Originally posted by mikey G View PostI hear ya. Are you at least going to do a euro conversion before then? I'd **** for you to have all this custom work done and no bumper conversion.Originally posted by theseeker411 View PostEmail TunerShop and see if they can't build you some custom lips and barrels. They're not the cheapest dudes out there, but they got me the custom built 4/5" outer lips for the Equips in 4 weeks. From Germany.Daily Driver: 2007 BMW 550i
Project: 1985 BMW 635csi
Project SmurfShark - BMW e24 Build thread
http://www.stanceworks.com/forums/sh...09#post1340209
http://instagram.com/xerxes310
Comment
-
Not much to update today.
Sold the ESM wheels ....got a good deal on some Rial Imola Race wheels up and refurbished them. 18x10 4.5" lip 18x8.5 3" lip
I still have my AC Schnitzer type 1 and epsilons sitting on the back burning waiting for $$
I'm a wheel hoarder.
I'm trying to find 3 more of these 2 inch valves if anyone knows of where I can find them.
Daily Driver: 2007 BMW 550i
Project: 1985 BMW 635csi
Project SmurfShark - BMW e24 Build thread
http://www.stanceworks.com/forums/sh...09#post1340209
http://instagram.com/xerxes310
Comment
-
Originally posted by theseeker411 View PostBlack Forest Industries might have those valve stems.
Contacted over a dozen valve stem manufacturers, wheel specialists and tire shops with no luck so I'm having the valve hole sealed up and making a new one for regular valves.Daily Driver: 2007 BMW 550i
Project: 1985 BMW 635csi
Project SmurfShark - BMW e24 Build thread
http://www.stanceworks.com/forums/sh...09#post1340209
http://instagram.com/xerxes310
Comment
-
Daily Driver: 2007 BMW 550i
Project: 1985 BMW 635csi
Project SmurfShark - BMW e24 Build thread
http://www.stanceworks.com/forums/sh...09#post1340209
http://instagram.com/xerxes310
Comment
-
A little update.
I busted my a$$ to get the car put together for Mfest IX Las Vegas. Picked up BMW Turbine wheels the day before(my original wheel build got pushed back again), mounted my spoiler, ZIP Tied the euro front bumper and hit the road at 5am(no sleep) to meet up with the Los Angeles caravan to Las Vegas for Mfest.
10 miles into the drive, I see a huge puff of white smoke in my rear view. FML
Luckily there was a shop off of the nearest exit
Checking compression and plugs tonight but I'm pretty sure it's the head gasket since water was pouring out of the tailpipe.Daily Driver: 2007 BMW 550i
Project: 1985 BMW 635csi
Project SmurfShark - BMW e24 Build thread
http://www.stanceworks.com/forums/sh...09#post1340209
http://instagram.com/xerxes310
Comment
-
New wheels look really good!!_____________________________MY BUILD THREAD_____________________________
__________________________________________________ ______________________
Comment
-
Originally posted by lordicon232 View PostNew wheels look really good!!
I will be swapping them out soon but have a pretty cool plan with the turbine faces.Daily Driver: 2007 BMW 550i
Project: 1985 BMW 635csi
Project SmurfShark - BMW e24 Build thread
http://www.stanceworks.com/forums/sh...09#post1340209
http://instagram.com/xerxes310
Comment
-
Originally posted by gearheaded View PostDamn, this is sweet! Different, classy, just a lot of win put together!Daily Driver: 2007 BMW 550i
Project: 1985 BMW 635csi
Project SmurfShark - BMW e24 Build thread
http://www.stanceworks.com/forums/sh...09#post1340209
http://instagram.com/xerxes310
Comment
-
Sorry, this is probably the slowest build thread ever!!
I ended up having a nice size hole in my head so I just decided to pickup a low mile Euro m30 with the plans to just swap it in. My conscious told me to rebuild while I already had it out of the car so I've taken it apart and sent everything off to the machine shop. I should be getting it back next week and starting the rebuild...I have no clue what I'm doing so wish me luck!
Ohh and then I got my Wheels!
While the car was up on jack stands I decided I might as well go ahead and bag it. Here's the kit I had made.
I started getting wild 18x11" 3 piece M-system ideas and then this happened.........
I don't know which wheels to run on my shark but I've been getting dirty thoughts of buying an e34 M5 so I might have another home for my 18" M-Systems!Daily Driver: 2007 BMW 550i
Project: 1985 BMW 635csi
Project SmurfShark - BMW e24 Build thread
http://www.stanceworks.com/forums/sh...09#post1340209
http://instagram.com/xerxes310
Comment
-
Originally posted by Bronzit View PostI saw your post on IG with the M Systems. They look so good. I love that you'll be able to switch fans and t stars with them, as well as lips/barrels. So much adjustability. Haha.Daily Driver: 2007 BMW 550i
Project: 1985 BMW 635csi
Project SmurfShark - BMW e24 Build thread
http://www.stanceworks.com/forums/sh...09#post1340209
http://instagram.com/xerxes310
Comment
-
wow man, i love it !
you got more information about the centres ? thats the hottest wheel i ever seen
Comment
Comment