If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Nope, no build thread yet. It would be a superslow build I need to replace the headliner so I'll have a look underneath the roofrails,I might remove them, it looks cool.
Also the paint is very bad, it def needs a respray or wrapping.
Anyway, throw those corvette wheels on quickly, I'm curious
i would respray, wrapping fits newer cars with more "lines"
i will be putting them on the same day as i get them, even with the sucky ballon tires that are on the rims atm IF they fit :S
There are barely any equipment in it which is good = light weight hahaha (A)
It has aftermarket centrallocking which sounds like prisongates and scares everyone
I have 30mm adapters on each corner now with the bmw rims on which is 5x120 and the new corvette rims are 5x120.6 so they should fit
Nope, no build thread yet. It would be a superslow build I need to replace the headliner so I'll have a look underneath the roofrails,I might remove them, it looks cool.
Also the paint is very bad, it def needs a respray or wrapping.
Anyway, throw those corvette wheels on quickly, I'm curious
You know its weird that i looked at a set like this for my omega this weekend
Now i'm even more excited to see these on the car!
Did you get the pm?
Get them! saladshooters are awesome !!
Yah got det pm, Thanks
its going to be a big change from 7.5 at each corner to 8.5 in front and 9.5 in the rear, i can't wait! im afraid that i will miss rims with edge though, got a soft spot for rims with an edge.....
well i do have some AC schnitzers up my sleeves... eheheh
Oh boy, those would look Nice Are you going to run those on adapters?
Did you remove the roofthings yourself? Mine are still on
but it looks real cool without
Nah man, the roof rails wasnt on when i bought it
Do you have a thread with your wagon? #Puntoevo
There are barely any equipment in it which is good = light weight hahaha (A)
It has aftermarket centrallocking which sounds like prisongates and scares everyone
I have 30mm adapters on each corner now with the bmw rims on which is 5x120 and the new corvette rims are 5x120.6 so they should fit
photo of my last car and when i just bought the omega
Oh boy, those would look Nice Are you going to run those on adapters?
Did you remove the roofthings yourself? Mine are still on
but it looks real cool without
I found some rims that will fit this car very good
Picking them up in a couple of days, they are 8.5 wide in front and 9.5 in rear, i was thinking 195/45 in front and 205/45 in rear
Leave a comment: