Project Dirty Dimepiece

[HAM8URGER]

Here's a little bit of bottom-end assembly

[HAM8URGER]

I'm thinking that maybe I can cut a little piece of black abs or something to fill the gap. Anyone have a good suggestion?

[HAM8URGER]

It really fits this car nicely. I used a Boss hub adapter to mount it. The steering wheel mounted to the adapter fine...


But the adapter left a little bit of a gap to the column shroud deal

[HAM8URGER]

I forgot about this guy... nice weathered old Nardi. A shiny brand new one would look out of place on this car.

[HAM8URGER]

These are Byron Brackets. Weld them to the rear subframe. The rear control arms mount to them so you can adjust rear camber and whatnots...

[HAM8URGER]

Cant have one of these cars without the wink mirror!

[HAM8URGER]

[HAM8URGER]

More random parts:


Cheap intercooler


Cheap oil cooler


Mishimoto catch can (not sure if I'm gonna use this or not)


Random radiator hoses

[HAM8URGER]

I'm really contemplating whether or not to get these seats. They have that retro look...

[HAM8URGER]

Sard FPR



Fuel Injector Clinic 775cc Top Feed Injectors



Gold Bosch 044 fuel pump bracket and the dawg

[HAM8URGER]

Here are some fuel system goodies:
AEM KA24DE Top Feed Fuel Rail Kit


Aeromotive in-line fuel filter


Summit braided -6an fuel line and hose ends

[HAM8URGER]

DGR Fab front sump 1" front swaybar and endlinks

[HAM8URGER]

And I really like how shallow they are. Wont take up too much room. Nice setup for the harness' as well.

[HAM8URGER]

They are very nice pieces. Glass fronts and aluminum outer rings.

[HAM8URGER]

Custom gauges from Speedhut. Speedo, tach and fuel. The numbers bars and needle light up red at night