First Car and Stance Porsche Boxster S Build!

[244Brick]

That's low enough man, this is a damn Porsche not miata! LOL The only thing is its only missing is a lip and wheels!

[Miles.]

I like this build so far, needs poke though. and im with everybody else on the sticker, makes everything less clean.

[Yellow986S]

That's low enough man, this is a damn Porsche not miata! LOL The only thing is its only missing is a lip and wheels!

Haha I might have to raise it a quarter inch or so because the underbody panels have smacked a few times going over speedbumps. Any possible damage I can cause by smacking the underbody? The oil pan is pretty tucked up and safe but I am worried about the plastic undertrays, I have already cracked one

[Yellow986S]

I like this build so far, needs poke though. and im with everybody else on the sticker, makes everything less clean.

For sure going to have some nice wheels and poke soon. I am 50/50 on the sticker and am thinking of removing the Porsche lettering but leaving the black strip. good idea?

[Randomofodication]

For sure going to have some nice wheels and poke soon. I am 50/50 on the sticker and am thinking of removing the Porsche lettering but leaving the black strip. good idea?

I would get rid if just the yellow Porsche lettering. White wheels look soooo much better. How much lower will the coils go? Find out, then get a wheel/tire combo that won't rub at that setting, and crank em down but for serious do it.

[GJA003]

i like !

[M.Doban]

Wow. So at 16 this Porsche isn't your only car. And you now want an S4.

Those are some serious toys for a 16 year old. Rad.

[Yellow986S]

i like !

Thanks bro

Wow. So at 16 this Porsche isn't your only car. And you now want an S4.

Those are some serious toys for a 16 year old. Rad.

Haha im definitely lucky to be mobbing a Porsche . I'm 18 now and the Porsche is my only car but I use my dad's whips as a daily driver and we were considering an S4.

I would get rid if just the yellow Porsche lettering. White wheels look soooo much better. How much lower will the coils go? Find out, then get a wheel/tire combo that won't rub at that setting, and crank em down but for serious do it.

I'll get rid of the lettering soon. The KW V2's still have probably 5 threads left in front and back but I just upgraded to KW V3's. I think the V3's will allow for more drop. I'll be installing the V3's this weekend

[Thom]

This would look baller on some rpf1's man. If they can make them in your stud pattern.

[Yellow986S]

This would look baller on some rpf1's man. If they can make them in your stud pattern.

I know they make the NT03M in 5x130 not sure about the rpf1's, anyone know?
Rpf1's would look dope but I think I'd rather save my money and get some 3pc wheels.

[244Brick]

Haha I might have to raise it a quarter inch or so because the underbody panels have smacked a few times going over speedbumps. Any possible damage I can cause by smacking the underbody? The oil pan is pretty tucked up and safe but I am worried about the plastic undertrays, I have already cracked one

As long as the trans and motor is out the way, the only other concern would be gas tank. But the's not an issue on this. I know parts aren't cheap to replace. I'd kep it where its at IMO.

[Yellow986S]

Put in WORK!
The KW V3's are dope, they go lower too!

img_1401.jpg

img_1409.jpg

img_1406.jpg

img_1410_2.jpg

[rom2nv]

height is good IMO, can always go lower but it won't look much different...

wheels and lips are what you need, but you already know that! look forward to seeing more progress

[Yellow986S]

height is good IMO, can always go lower but it won't look much different...

wheels and lips are what you need, but you already know that! look forward to seeing more progress

Ya im low enough already. I need wheels but don't have the funds yet and I need new tires now so that's gonna set me back a few hundred. Thanks

Just finished installing the KW V3's today. I also did something to the car I think the majority of you guys have been waiting for
I'll upload some new pics soon.

[philavon]

that Porsche sticker is horrible, and your not even low lol
go about 2-3 inches lower before anyone cares about this build thread

that's pretty mean to say for a first car and first build thread sir. pretty sure when you bought your car it was high and not stanced. and by the way, looking at the thread right now, people seem to care about the thread. if you're going to be an ass for nothing why dont you just leave this forum. the car scene right now needs a lot less people like you and a lot more people like the kid. people have to stop shitting on eachother for no fucking reason. it's not a competition, and if you think it is, get the fuck out.