Tweet
Hey guys, would like to introduce myself and my current car
My name is Jason and I hail from Sydney, Australia. I currently drive a 1983 (very last few flat fronts to be made) KE70 corolla, Currently piecing together a 4AGE smallport motor with 30 thou shaved head and TRD 0.5mm head gasket, other than that stock. Want to throw some Keihin FCR41 carbs on it eventually along with a suitable cam setup (hope for shim under bucket setup for ability to run cams with lift above 8.5mm)
Currently sitting on cut springs front (shocking to drive) and pedders heavy duty AU falcon rear springs cut. the rear feels great although slightly high for my aim, will cut a coil or two more off. Have ST185 short stroke struts with AJPS AE86 6KG front springs ready to go in, but unsure if I want to use them. May consider changing to a BC coilover setup or something of that nature. throw some tokico short stroke rear shocks in. Some T3 (technotoytuning) rose jointed LCA's for camber, shorten castor rods to get the car steering the way I want, and a few small things.
Want to bring the front down approx 20-30mm, and the rear approx 10mm. I've already done most of the hard work getting the rears to fit, removing the inner guard work and bashing the standard guards out. they look shocking but they will do for the time being. Fronts should just clear the guards, dont want to modify them but also dont care if they do hit.
Thats it for now will keep you guys updated depending on peoples interests in seeing more
My name is Jason and I hail from Sydney, Australia. I currently drive a 1983 (very last few flat fronts to be made) KE70 corolla, Currently piecing together a 4AGE smallport motor with 30 thou shaved head and TRD 0.5mm head gasket, other than that stock. Want to throw some Keihin FCR41 carbs on it eventually along with a suitable cam setup (hope for shim under bucket setup for ability to run cams with lift above 8.5mm)
Currently sitting on cut springs front (shocking to drive) and pedders heavy duty AU falcon rear springs cut. the rear feels great although slightly high for my aim, will cut a coil or two more off. Have ST185 short stroke struts with AJPS AE86 6KG front springs ready to go in, but unsure if I want to use them. May consider changing to a BC coilover setup or something of that nature. throw some tokico short stroke rear shocks in. Some T3 (technotoytuning) rose jointed LCA's for camber, shorten castor rods to get the car steering the way I want, and a few small things.
Want to bring the front down approx 20-30mm, and the rear approx 10mm. I've already done most of the hard work getting the rears to fit, removing the inner guard work and bashing the standard guards out. they look shocking but they will do for the time being. Fronts should just clear the guards, dont want to modify them but also dont care if they do hit.
Thats it for now will keep you guys updated depending on peoples interests in seeing more
Comment