A Southern Accent

[244Brick]

Damn son!!! That looks super DOPE

[andybob]

Good to see this still around.

[rab71]

This is pretty sweet. Had a 1997 Hyundai Accent that I turbocharged way back when... Fun little cars.

[audobon]

im gonna just leave this here....



17x7.5 - probably the only set of 4 lugs in the americas. Until I find another, i'm claiming it!

Dont get it twisted at all,

OEM+ DC Sports Strut Bar
D2 36W Coilovers
2006 Hyundai Tiburon 2.0 engine
6 Puck Clutch + 11lb Flywheel
17x7.5 +35 Speedline Corse Mistrals

way more to come.

[rice4life]

Post that question in the wheels section, maybe someone there can help you.

[audobon]

Are you running the alpha ecu or the beta2?

http://www.hyundaiperformance.com/forums/na-tuning-hybrid-forum/82158-vvt-swap-project.html

In that thread they mention that the alpha ecu wont run cvvt.

Glad to see some more KDM here

Beta 2 everything, besides transmission, that's still an alpha. Yeah man, im trying to finish up this car really soon -- seems like too much focus is on the more common korean made cars, genesis, sonata. Reason why I put together this genesis killer

[rice4life]

Are you running the alpha ecu or the beta2?

http://www.hyundaiperformance.com/forums/na-tuning-hybrid-forum/82158-vvt-swap-project.html

In that thread they mention that the alpha ecu wont run cvvt.

Glad to see some more KDM here

[audobon]

welcome back!
Do you have the CVVT working on that beta2?

Get better pics up mane, cannot wait to see more

Nah man, I dont have it. The shop that did the wiring couldnt really figure it out and nobody thats done the swaps into this year model themselves have figured it out either. I might go ahead and buy a 08 2.0 CVVT engine soon though, and try to figure it out myself.

[rice4life]

welcome back!
Do you have the CVVT working on that beta2?

Get better pics up mane, cannot wait to see more

[audobon]

My old thread got buried in time somewhere.

[found the threads, but this one sounds 10x better http://www.stanceworks.com/forums/sh...ad.php?t=10793 - http://www.stanceworks.com/forums/showthread.php?t=6656 ]

So I decided to make a part 2 of sorts, since I've recently picked up my own personal camera and can actually update frequently.

This has been a 5 year on and off project, been through several wheel setups, transmissions and styles. I've finally decided to go back to the original plan that I had a few years into even purchasing the car. The picture below is the last stage it was in before being sent off to the shop for the wiring job to be done on the swap.

The engine that I have swapped into my car is from an 06 tibby, about 40-50 more horsepower and 35+ torque than the gas sipping accent motor that I burnt out.



The wiring is done, and I have recently thrown in a stage 3 - six puck clutch kit to put more of that power to the ground. The BBS RM's have since then, been sold to a buddy of mine. Debating on getting these wheels back now under, 15x8.5 +7 | 15x9 +3 specs or going for some 16's to fill up the wheel wells a little bit more. The next step that I have planned is fabbing up an straight pipe exhaust with an ISIS muffler. Going to be joining a few autocross and road racing organizations this summer, so im trying to crank out all the horsepower I can.

http://www.hyundai-forums.com/184-mc...dai-build.html < ----- HYUNDAIFORUMS BUILD THREAD 25+ pages