Well started in a few days ago, gonna have to put it on hold for a little bit, but I decided to cut the intake off the stock cast manifold and will use that to start from.
Opened up to .70mm to give a larger shot of fuel under acceleration.
Another .70mm hole drilled with the pin vise to extend the progression circuit.
All done, got the linkage sorted out for the most part.
Had the flip carb around to get better throttle routing. Hopefully this won't be an issue. I don't like having the choke on the backside, but hopefully it will be set it and forget it.
The tiny tiny turbo infront of the 61 Minor.
Opened up to .70mm to give a larger shot of fuel under acceleration.
Another .70mm hole drilled with the pin vise to extend the progression circuit.
All done, got the linkage sorted out for the most part.
Had the flip carb around to get better throttle routing. Hopefully this won't be an issue. I don't like having the choke on the backside, but hopefully it will be set it and forget it.
The tiny tiny turbo infront of the 61 Minor.
Comment