If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hows that Outback handle on the coilovers? I have pretty much the same car but went with legacy H&R spring and legacy struts. It looks like yours is about an inch lower than mine. Looks good
This is about 5.5" lower than stock, the mudflaps are a finger's width off the ground and the exhaust under the rear axle is about 1" off the ground. It handles okay, I mean anything that you lower this far isn't gonna handle that great anyway. It drags on everything but the ride isn't all that bad. It's stiff but forgiving.
"Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car.
Horsepower is how fast you hit the wall, torque is how far you take the wall with you."
Are there any new updates? I'm so eager to see this thing! I have the exact same car, just a 2001 L model. I'm trying to figure out what coilovers I'm gonna use, apparently Tein Legacy B4 BE fit the Outbacks like a glove but that's just what I've heard
Are there any new updates? I'm so eager to see this thing! I have the exact same car, just a 2001 L model. I'm trying to figure out what coilovers I'm gonna use, apparently Tein Legacy B4 BE fit the Outbacks like a glove but that's just what I've heard
Yeah, the legacy coilovers fit because the outback suspension is the same aside from having subframe spacers. They're just a lot more money than racelands.
"Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car.
Horsepower is how fast you hit the wall, torque is how far you take the wall with you."
Comment