Too many projects, but mainly an e28

[xBDIRTY]

Found a wood mat for cheap at the store and decided I'd try to cut it to shape and make a mat for my trunk... I think it turned out okay.... The ammo can houses my tow rope

DSC_0759 by HFD Crew - Hela Fass Dooo, on Flickr

Also went and snapped a couple of shots today out of boredom

DSC_0683 by HFD Crew - Hela Fass Dooo, on Flickr


DSC_0701 by HFD Crew - Hela Fass Dooo, on Flickr


DSC_0712 by HFD Crew - Hela Fass Dooo, on Flickr


DSC_0725 by HFD Crew - Hela Fass Dooo, on Flickr


DSC_0731 by HFD Crew - Hela Fass Dooo, on Flickr


DSC_0739 by HFD Crew - Hela Fass Dooo, on Flickr


DSC_0742 by HFD Crew - Hela Fass Dooo, on Flickr


DSC_0695 by HFD Crew - Hela Fass Dooo, on Flickr

[Wyatt Lay]

The socket is an 8mm. Or 5/16. You can't find em at lowes er whatever.

[xBDIRTY]

Find out what bolts they use, then go on ebay or tuner shop to get the costs.

Don't know if this helps at all

[AMGwheelwhore]

Find out what bolts they use, then go on ebay or tuner shop to get the costs.

[xBDIRTY]

Alright guys, I've been absent for a while, I've had to watch my money to make sure I can pay off the xB wheels as they will be done in a week or so. But anyways, I ran onto someone who wants to trade me some style 5's for my Rotiform BLQ's. I wanted style 5's from the beginning for my e28 and I think this would be a good opportunity to scoop a set up. However, my knowledge on multi-piece wheels is still limited as I have never owned a set, so I had a couple of questions... I will definitely want to refinish them, and will need new hardware. I will have connections on powdercoating or paint, as well as polishing on the lips.... But what is the average cost of new hardware, etc? The Guy with the BBS' said he would throw cash on top with the wheels, but I'm not sure what to ask him for as far as extra $ goes. Thanks for any input guys. I'll be stoked if I end up with them

[Queef|Chief]

I'm beyond jealous, love these cars!!! Keep up the good work

[los02]

I left the heater valve unplugged which leaves it open allowing the hot coolant to pass through and give me heat until my new valve shows up

I learned something new for if I ever get in a pinch. Thanks.

[xBDIRTY]

I thought the heat didn't work in my E28 earlier this week. First time I've needed it since I bought it. Then I read somewhere that heat does not come out of the "face" vents, which happen to be the setting I had it on. I went to my garage the next day and switched it to defrost and to floor and guess what... I DO have heat.

So...

<<<
>>>
<<< = no heat

>>>
<<<
>>> = heat

or
>>>
<<<
<<< = heat

or
<<<
<<<
>>> = heat

Hope the above makes sense.

Yeah I didn't have any heat, no matter what I did. I left the heater valve unplugged which leaves it open allowing the hot coolant to pass through and give me heat until my new valve shows up. I'd leave it ghetto rigged and unplugged but for 15 bucks I may as well just fix it. Thanks for the info anyways though

[los02]

Then i decided to tear into my manual to make sure I was actually operating the hvac controls properly. They don't give you many clues on the dash for what does what hahaha ]

I thought the heat didn't work in my E28 earlier this week. First time I've needed it since I bought it. Then I read somewhere that heat does not come out of the "face" vents, which happen to be the setting I had it on. I went to my garage the next day and switched it to defrost and to floor and guess what... I DO have heat.

So...

<<<
>>>
<<< = no heat

>>>
<<<
>>> = heat

or
>>>
<<<
<<< = heat

or
<<<
<<<
>>> = heat

Hope the above makes sense.

[rsingh3g]

Lol but I can appreciate a nice clean car, when I see one

[xBDIRTY]

After reading through this thread, I really wish I was more active on this forum. Keep up the good work man. The doorcards look like they're a factory option, man I'm jealous. Also if you remember, how many coils did you cut on the e21 and did you have to do anything else to get it to sit like that? I'm currently saving up some money for a suspension redo on mine but don't want to be sitting so high till then.

Thanks! I don't really remember how many I cut on the e21 The best thing to do is start with a couple, reinstall, and take one or 1/2 off at a time as desired. And that's all I did was cut the springs, no further notching, etc.

lol well duh I like the xB, because I am also a Scion owner. 2013 TC RS 8.0

It all makes sense now

[rsingh3g]

lol well duh I like the xB, because I am also a Scion owner. 2013 TC RS 8.0

[Tom Cruise]

After reading through this thread, I really wish I was more active on this forum. Keep up the good work man. The doorcards look like they're a factory option, man I'm jealous. Also if you remember, how many coils did you cut on the e21 and did you have to do anything else to get it to sit like that? I'm currently saving up some money for a suspension redo on mine but don't want to be sitting so high till then.

[xBDIRTY]

Looks so dang good! I hadn't looked at this thread in awhile. Those rolling shots are amazing. I almost like Bronzit in this situation.

Thanks! I am pretty stoked on the rolling shots, a car looks its best in motion IMO. I am usually a dark colored car fan, but the bronzit is definitely growing on me, and easier to keep looking clean

[Bronzit]

Looks so dang good! I hadn't looked at this thread in awhile. Those rolling shots are amazing. I almost like Bronzit in this situation.