Shumai

[RubbderDucky]

Normally, Miata's aren't my thing. But I love this. The rear diffuser looks sweet!

[Vincent123]

Car is back finally!

I removed the license plate as soon as I got home. Side splitters are a bit wavy from sitting in the burning hot 100 degree weather for the past 2 weeks. Gotta figure out a way to straighten them up again


Gotta love instagram filters haha

[Vincent123]

[Le'moine]

Looks great bro,good work!

[Vincent123]

Got bored and plastidipped my door sill. Cut out the raised portions to expose the original black. Now I just need to find some tan floor mats so I can dye them red, either that or find some generic red carpet and cut it the same shape as my oem floormats. Not sure how dye would hold up to everyday driving, not really down to have any red dye rub off on my shoes

[Vincent123]

So my homie stephen had some universal side mount brackets laying around and we used them to install the recaro's.



We decided to install passenger side first because if we couldnt get it installed on the driver side then atleast I could still drive home. But as you can see from the photos, they sit way too high. Compare its height to the stock seat's height.




If I take out all the seat cushion I will sit at stock height, which is super uncomfortable. We used oem rails + universal side mounts. I was thinking of just bolting them straight to the floor, but what would I need to do this? I'm not looking to spend another $250 (approx) to make custom low rails

The good thing is that it clears my door panel





Here is my car with 1 recaro seat installed.

[Vincent123]

Picked up a pair of seat brackets made by Pro-Car Innovations from Kazespec Engineering.

High quality stuff here, definitely not cheap but I'm hoping it will help me get the seat much lower.
Mounted straight to the floor with these brackets, fixed mount with no rails.

[E30LIFE]

Nice little budget NB build dude. Can you PM me the name of the company you got the ABS from? I would really appreciate it.

[Vincent123]

Got the brackets installed today onto the recaros.
They sit way lower than my side mount brackets + oem rails.

Very high quality, a little bit pricey but I wouldnt hesitate to purchase again.





How it was previously mounted. Universal side mount brackets on oem rails




Ground clearance before




Ground clearance after




Mounted into the car




Seats sitting below roll bar now




If you look back at my other photo when it was still on the oem rails, the top of the seat would be parallel to the top of the roll bar. Now it is well below the main hoop, atleast 3-4" lower than it was before. Definitely sitting lower than stock. I can even go as far as cutting out some foam to get even lower, but where it sits now is a good height for me. Finally glad to have it finished, took atleast 4-5 hours to mount it in the perfect spot and multiple trips to the hardware store to get longer bolts with spacers etc

[Vincent123]

[coconutt]

Love it. The DIY work here is much appreciated.

[ryanjblajda]

this is definitely one of my favorite miatas. have you retrofitted those projectors yet or did i miss that? i'm looking into doing that on my car.

[royalife]

dude epic! ive always loved NBs! yours made me love them more. good work sir!

[Khalil]

Looks mean

[Chuckdee]

Looks mad aggressive!